1
Tyros 5 (SFF2) / Re: usb showing enpty
« Last post by freeplay on Today at 03:07:11 PM »Hi Divemaster. Yes i was switching between songs.
Recent Posts
2
PSR-SX900/SX700/SX600 / Re: SX900 speakers fire toward audience vs older S models?
« Last post by DrakeM on Today at 12:08:18 PM »Well here is a fourth for you to consider.
Get 2 "Maui 5" external speaker systems (for stereo) and blow the Genos and Genos 2 out of the ballpark.
Cost on Amazon is $675 each. Keyboard and speakers $3650.
The additional cost would still be less than any Genos and the speaker system would last forever.
That would be a savings of about $1350 or more.
Plus the SX900 speakers are now your monitor system.
Get 2 "Maui 5" external speaker systems (for stereo) and blow the Genos and Genos 2 out of the ballpark.
Cost on Amazon is $675 each. Keyboard and speakers $3650.
The additional cost would still be less than any Genos and the speaker system would last forever.
That would be a savings of about $1350 or more.
Plus the SX900 speakers are now your monitor system.
3
Genos2 / Re: New firmware 1.04 Genos2
« Last post by SynthHog on Today at 11:54:05 AM »I take it that you used the packs on the USB to load into the YEM. By all means keep these on a USB as back ups. I also have mine saved to a folder on my computer.
Thanks for the quick response....Yes i did use YEM and yip also saved in a folder on my computer.....
I'll just fire the Update onto the same stick and Update...
Thanks again....
4
PSR-SX900/SX700/SX600 / Re: SX900 speakers fire toward audience vs older S models?
« Last post by KurtAgain on Today at 11:47:20 AM »And so you got what was to be expected: three people, three opinions. 
Kurt
Kurt
5
Genos2 / Re: New firmware 1.04 Genos2
« Last post by EileenL on Today at 11:34:50 AM »I take it that you used the packs on the USB to load into the YEM. By all means keep these on a USB as back ups. I also have mine saved to a folder on my computer.
6
PSR-SX900/SX700/SX600 / Re: SX900 speakers fire toward audience vs older S models?
« Last post by BogdanH on Today at 11:18:26 AM »hello CPAC,
It's impossible to really compare GNS-MS01 and SX900 built-in speakers, because it's impossible to connect GNS-MS01 speakers into SX900. That is, if you listen to GNS-MS01 speakers, you're actually listen to Genos keyboard (voices).
The only way that I can think of is, if someone would bother to connect SX900 line-out into Genos aux-in and then listen SX900 voices on GNS-MS01 speakers. However, such comparison would only be valid if loudness of both speakers would be exactly the same (cannot be determined by ear). But even then, GNS-MS01 would probably sound better -simply because satellites are pointing directly toward the listener.
I think that it's a bit misleading saying that GNS-MS01 has a sub-woofer (simply because it's a separate cabinet)... it's just a woofer and so don't expect wonders.
My personal opinion... quality of supplied speakers shouldn't influence the decision between Genos and SX900 -there are other much more important parameters.
Bogdan
It's impossible to really compare GNS-MS01 and SX900 built-in speakers, because it's impossible to connect GNS-MS01 speakers into SX900. That is, if you listen to GNS-MS01 speakers, you're actually listen to Genos keyboard (voices).
The only way that I can think of is, if someone would bother to connect SX900 line-out into Genos aux-in and then listen SX900 voices on GNS-MS01 speakers. However, such comparison would only be valid if loudness of both speakers would be exactly the same (cannot be determined by ear). But even then, GNS-MS01 would probably sound better -simply because satellites are pointing directly toward the listener.
I think that it's a bit misleading saying that GNS-MS01 has a sub-woofer (simply because it's a separate cabinet)... it's just a woofer and so don't expect wonders.
My personal opinion... quality of supplied speakers shouldn't influence the decision between Genos and SX900 -there are other much more important parameters.
Bogdan
7
Genos2 / Re: New firmware 1.04 Genos2
« Last post by SynthHog on Today at 11:01:16 AM »Hi there Folks....Only had my Genos-2 a couple of weeks....Might be a silly question....I've a USB stick which i've Installed various Expansion packs on to the Genos from....Do i need to use a blank USB stick or is the stick okay with the Various Packs left on?
Thanks in advance.....
Thanks in advance.....
8
PSR-SX900/SX700/SX600 / Re: SX900 speakers fire toward audience vs older S models?
« Last post by mikf on Today at 10:38:28 AM »The built-in speakers on portable arrangers are cheap, convenient and passable for personal use. That’s all you can expect.
But pretty much any external system from about $100 upwards will be not just be an improvement in volume, it will be a huge improvement in quality.
Mike
But pretty much any external system from about $100 upwards will be not just be an improvement in volume, it will be a huge improvement in quality.
Mike
9
Tyros 5 (SFF2) / Re: usb showing enpty
« Last post by Divemaster on Today at 10:34:22 AM »Try another USB stick
Are you switching between styles, midis, MP3 tracks etc?
Maybe?
Are you switching between styles, midis, MP3 tracks etc?
Maybe?
10
Genos2 / Re: System exclusive messages are neither sent nor received on Genos 2 and on Cubase
« Last post by ugawoga on Today at 10:17:12 AM »Recording in cubase directly from Genos involves using track 1 for system information from looking at Tiho video..
Right 1 from channel 2 and so on.
Also for each track you record now in Cubase 13 in inspector there is a letter P which means project filtering and that should now be checked for each track. In Cubase 12 you had to do it another way.
This is where i am at at the moment and nearly grasping it.
I successfully done multitrack live recording in one go, so all tracks display, but if i imported it back into Genos it does not sound the same.
So now i will try the leave track 1 for information as channel 1 carries the info and see what happens.
As far as using Genos as a controller for Cubase i think that involves mapping and i have not conquered that yet.
I have had a go and touched a sliders on Genos and it shows in the mapping part in Cubase.
I am just concentrating on sliders to control the volume in the Cubase mixer at the moment.
I get two or three showing when i touch the Genos sliders, but things do not go right after that. So, I am at a dead end with that at the moment. I am wondering if i have to change things in the Genos Live Control. I have to go slow as It takes a little bit of at a time and a few bungle's in the hope of getting a result.
I have written back to Tiho and hopefully he can put me in the right direction as he has done this successfully.
Clever guy from Bosnia.
It would be great if Yamaha made these scripts, as they say you can fully integrate Genos 2 and Cubase 13 but they never explain the things that we want. Anyone on arguing , why do you just not sit and play. I do practice every day , but going deeper is fun and keeps the noddle in prime condition. "Where did i put my keys"!!! 
All the Best
John
Ps i am trying to explain in my way as it is a nasty one to get your head around
Right 1 from channel 2 and so on.
Also for each track you record now in Cubase 13 in inspector there is a letter P which means project filtering and that should now be checked for each track. In Cubase 12 you had to do it another way.
This is where i am at at the moment and nearly grasping it.
I successfully done multitrack live recording in one go, so all tracks display, but if i imported it back into Genos it does not sound the same.
So now i will try the leave track 1 for information as channel 1 carries the info and see what happens.
As far as using Genos as a controller for Cubase i think that involves mapping and i have not conquered that yet.
I have had a go and touched a sliders on Genos and it shows in the mapping part in Cubase.
I am just concentrating on sliders to control the volume in the Cubase mixer at the moment.
I get two or three showing when i touch the Genos sliders, but things do not go right after that. So, I am at a dead end with that at the moment. I am wondering if i have to change things in the Genos Live Control. I have to go slow as It takes a little bit of at a time and a few bungle's in the hope of getting a result.
I have written back to Tiho and hopefully he can put me in the right direction as he has done this successfully.
Clever guy from Bosnia.
It would be great if Yamaha made these scripts, as they say you can fully integrate Genos 2 and Cubase 13 but they never explain the things that we want. Anyone on arguing , why do you just not sit and play. I do practice every day , but going deeper is fun and keeps the noddle in prime condition. "Where did i put my keys"!!!
All the Best
John
Ps i am trying to explain in my way as it is a nasty one to get your head around
SMF spam blocked by CleanTalk