Hi,
I'm writing to this thread, as I think, it might hit the rigth people.
I'm currently writing a Chord Loop Editor, so one can input the Chord Progressions at the PC, convert them to a Chord Looper Bank and transfer that to the keyboard (I have a Genos). So you get something like 'Band-in-a-Genos'.
I decoded the clb files of my Genos, here is what I found out:
The file contains 8 SMF Format 0 MIDI sections, a header followed by a track, which only contains the chord changes as XF-Sysex.
Each Slot you touched with a recording starts with "CLD_00n" (n=1 .. 8 ) followed by CR/LF (0D 0A). The empty slots only start with CR/LF, followed by the header and an empty track (len=0).
Now my questions:
After the track containing the changes, there are 5 additional bytes, which I don't understand. The sequence is:
BC XX FF 2F 00 (for XX I found 30, 4C, 28 und 51 - seems to be some kind of a value)
That bytes don't belong to the track, so they are most probably not MIDI commands.
Any ideas ?
And...
If you have some, could you please upload some .clb files for me to decode and check. The chords don't need to come from any song. Would be good to have some more 'exotic' chords included.
Thanks a lot
Rainer