Yamaha Genos V2.02 - Bugs, Problems And some shortcomings
1. If you drop all the sliders down and restart the button you will see that all the parameters will be 100 except for Song A.
2. If you put two or three Insert effects in one voice and change a parameter to all effects and save it to the registration memory, you will see that it will save only the parameters from the last effect you have selected will reset to default Mode. That is, 40 as it originally was. This problem is valid from version 1.40 onwards. That is, the sound I saved before version 1.40 Everything works fine.
3. Does not store sounds in OTS with two or three Insert effects. That is, do I have to select a sound that does not have more than one effect to put it in OTS? I don't think that makes sense.
4. Drum Setup at Style Creator No more than 70 Drum Kits from Expansion. And what he brings out is in order. I have my own packages, I have purchased packages, and I have a lot of REX Files and I can't use them in Drum Setup. and it would be a good idea to put together a list search like the previous models. Imagine turning the washer until you find what you want.
4A. About the point 4, it also would be great to see a SAVE button on your edited drum kit. Maybe Yamaha could implement this function also in Song, Multipads and main panel. For example: when you select a Organ Flute voice, the Voice Edit tab call the drawbars page. So, when you select a drum voice, the Voice Edit tab could call the Drum Setup page with the ability to edit single parts and save your new drum set, that you can use everywere.
4B. There is also a small bug into the Drum Setup function: immediately after entering the Drum Setup page, the reverb activates itself without being able to adjust it.
4C. if possible, add 8 separate channels for REX2 files and correct the waveforms limit since the Maximum Number of Waveforms is 32768 When uploading to the YEM Drum Kit or REX File For some reason, it takes almost three times as much space as From real WaveForms. For example, if you created a Drum Kit in which there are 100 wave elements, then for some reason in YEM about 250 waveforms are created, of which 150 are empty junk files. You can do it as a simple Sample Voice No matter how much Wave Files you load on a single sound, a maximum of 8 waveforms is used.
5. I would like to create a style and use a mega voice bass to be able to write on a channel and Play and Slide Gliss And Noise which is in the upper octave after the C6 note. That is to say, if I write on one channel all that changing chord will change the top notes C6 And up While this should be a fix. As in the factory. The factory rhythms are so written while not allowing us to do so why?
6. We'd like to add us to Style Creator Different Signatures in any Variations. Or at least in Fills We can write at least 2 Measure.
7. To the style creator In the Assembly option We can copy Rhythm1-2 paste to any other bank of the same type and upside down.
8. Please add CASM Editor to Style Creator. Why not have the option of writing as factory rates are written?
9. The MP3 player from the first version to this day has problems. Example if I have say 100 songs in the stick from the 100 to 70 and they will appear in the Playlist And from those 70 again it will bug me in some songs.
10. We would like to add the Link Volume Level feature to the mixer. This would help us to mix the rhythms and songs quickly and correctly. That is, they happen to give me a rhythm that is written much louder than the factory rhythm; this would help to lower the sound quickly and efficiently.
11. In Scale Tune we would like Cent to go + -99. So that we can make sounds like Terca, for example. As it is now + -64 Except for the Arabic ladder it doesn't help us in anything.
12. Add to the MultiPad Creator, the Quantize option. As it would be great for Style Creator to add the export To MultiPad option to one of the channels.
13. We can set the Volume on each Pad separately in MultiPads. As is the case with Audio Link MultiPad. In MultiPads Change EQ parameters. The Insert effects feature. And the option in the settings can work as a start stop on the Pads. That is, the first push plays the Pad, the second push stops the Pad.
14. We'd like to voice in Legato Portamento in Poly Mode. This helps in the Reality of the violin. As an example of Oriental Strings.
And Fix Portamento Time In Crossfade Mode. That is when you have Portamento Time Indicator 0 There is a great Timing Between the two notes, While it should normally pass faster and sharply.
15. Make editing option among Insert effects. That is, if I have put in two or three effects in a sound and want to change parameters in one of the effects, I first have to close the effect and reopen it so that I can select it. Otherwise I can only tease out the last effect I have added to Echo. In a nutshell if I want to go back to the first effect I've added and edit a parameter I need to get Mixer, effects, Assign Part Settings, find the effect I want to edit, close it and reopen it so I can tease after the parameters)))
16. Add the option when in home mode We can set the washer where we want it. Example BPM tempo shift. Why do I press the tempo button first and then turn the washer?
Yamaha Expansion Manager v2.6.0
17. Add Element Copy Paste From Another Voice. That is, I have a sound ready and I want to get an Element And put it in another sound that I make to not load the samples again An One.
18. Why can't I edit Rom Sounds? Example to Change Note Range Ή to Change Velocity Range? That I could tease up to PSR 9000, Tyros1-2-4 Here's why I can't do these things?
19. And I would add Sample Edit, Loop Edit. Just examples I have some sounds that have not been set Right or Loops, How can I fix if I don't have the original samples In SF2 format or Wave, AIFF?))) In Motif and Montage Again there is good John Melas. Who will help us here?)))
Let's add at least export In SF2 format So we can do something.
20. I would like to add the Note Relase feature. That is, letting the note reproduce the sound. This exists in factory sounds because it doesn't exist in users?
21. We want to define the Elements The Art 1-2-3 buttons. Why Do I Have Three Useless Buttons When Using User Sounds?
Audio Phraser v1.0.1
22. Fill in & Break Not work correctly
23. A function to create/edit Arpeggios. Have them independent for the various voices R1/R2/R3 would be great!
24. Not working the sustain pental on Style Creator, (unacceptable)
25. In the Audio Chanel there is not EQ..
26. When we record any part in an Audio Style that we have created with the Audio phraser, when we try to quantize the part is not on time.