Hi Sunny,
Please go to the Transmit tab in the Genos MIDI Settings and make sure that the Part used to control the Organ module is displayed, e.g. in the "All Parts" template "Right 1 Port1 Ch1", i.e. page 1/5, if that Organ module is connected to MIDI A OUT terminal.
Now touch the white right arrow ( ▶ ) to display the additional settings page. There, remove all ticks except "Note" in the line of the part used. ("CC" = Control Change, "PC" = Program Change, "PB" = Pitch Bend, "AT" = After Touch). See also the attached screenshot.
Then touch the "Save" icon to save the changed MIDI template in the user drive. Please choose a meaningful file name. Then make sure that this changed MIDI template is actually activated (that is, that the new name is now displayed at the top).
Press "Exit" button or touch the "X" icon to close the MIDI display. This ensures that the current MIDI template is loaded with every restart.
By the way, if the Organ module has a programmable MIDI input filter, you could alternatively set it so that only incoming Note commands are allowed through, i.e. the rest are filtered out. Then you wouldn't need to change anything on the Genos.
Best regards,
Chris