I saved the USER EFFECT PRESET on the s900 to a USB Stick. Then checked the stick using a PC. It showed that file as a s900.bup. Changed the "bup" to "eff" then inserted the stick into the s910. Called up the "eff" file> hit save then went to VH USER file and sadly it was still empty. There is no USB1 tab ont the VH screen. I think I'm going to have to manualy copy the settings. Thanks for your input.
Hi Terry,
You obviously saved the wrong file. A .
bup file is a
Backup file and is saved in "Function > Utility > OWNER > BACKUP". A .bup file contains the following settings:
- User System settings
- User Effect settings (also User VH Settings)
- User MIDI settings
- User Music Finder settings
- as well as the entire content of the internal User drive (!)
However, .bup Backup files are not intended to be loaded/restored on another model.
Please go through my first post again. If you go to SAVE as described in "Function > Utility > SYSTEM RESET > USER EFFECT FILES", an .
eff file will be saved properly. Make sure that you really have selected the USB stick as the storage target, i.e. not the internal User drive.
Note: Loading of the S900 .eff file on the S910 is
also done in "Function > Utility > SYSTEM RESET > USER EFFECT FILES", i.e. NOT in the VH display!
Best regards,
Chris