Is it possible to use an EV Everse 8 powered speaker as my SX900 woofer. I plan to use the onboard speakers, in conjucntion with the sub. Thanks. Jim
Hi Jim,
As already mentioned by Bogdan, the EV Everse 8 is a full-range speaker. To use it as a subwoofer in conjunction with the internal SX900 speakers, I would proceed as follows:
Connect the SX900's Main Output L/L+R jack to Everse's Input #1 using an unbalanced cable (6.3 mm TS plugs on both ends).
Use the Everse's internal EQ to completely reduce treble and mid frequencies (-12 dB) and increase the bass frequencies significantly (+6 ... +12 dB).
Use Everse's Channel Volume and Master Volume controls to adjust the SUB volume to match the volume of the internal SX900 speakers.
As far as I know, the Everse even has an additional Master EQ, which can be switched between Graphic EQ (GEQ) and Parametric EQ (PEQ). This would allow you, for example, to significantly reduce all frequencies above 150 - 200 Hz and, if desired, increase the sub frequencies (below 150 - 200 Hz).
Seting the EQ directly on the Everse is a bit complicated as there are very few physical controls. I think it's easier if you use the associated smartphone app "EV QuickSmart".
Hope this helps!
Best regards,
Chris