Hi Guys,
Thanks very much for the help.
...
When you say re-memorizing, do you mean load the reg bank and the style then re-save the reg bank to link the style to all the registrations in that bank?
Thanks,
Martin
Hi Martin,
If the style has been memorized in ALL registrations of a bank, you must of course also re-memorize ALL registrations after the style has been reloaded manually. The procedure would then be:
- Press "Direct Access > Freeze" and make sure that only the checkmark "STYLE" is set in the Freeze settings. Press "EXIT" and make sure that the Freeze function is switched off (LED does not light up).
- Load the desired registration bank.
- Press registration button #1.
- Manually load the style from its new location.
- Re-memorize button #1. Make sure that the necessary checkmarks are set in the memory window.
- Activate Freeze to lock the style.
- Press Registration button #2 and re-memorize this button.
- Re-memorize the rest of the buttons in the same way.
- Re-save the registration bank.
- Turn Freeze off again.
P.S.
Some users only memorize the style in the
first registration of their banks, i.e. the other registrations of the bank do
not change the style. In this case it would of course be sufficient to just re-memorize Registration #1 and then directly re-save the bank.
By the way, the "Registration Manager" program mentioned by Fred is here:
>>>
https://psrtutorial.com/util/best.htmlHope this helps!
Best regards,
Chris