... Was wondering if anyone has any experience of using MixMaster
https://psrtutorial.com/MB/mixMaster.html
I can't get the mixer in it to control the mixer on my PSR-s670.
My DAW can so its something within the Mixmaster software.
I can get Mixmaster to play a MIDI file through my keyboard and it can change the sounds on particular channels. ...
Hi Richard,
for some reason, the Mixer of MixMaster obviously uses
Port 2 of the Yamaha USB-MIDI Driver.
You can do as stated on page 35 of the MixMaster Manual: Call up the GUI of the Yamaha USB-MIDI Driver set both "Out 1" and "Out 2" to the "1" bus. (See also the attached picture.)
- Make sure that the keyboard is connected to the PC via a USB type AB cable (and the keyboard is switched on) and the Yamaha USB-MIDI Driver (V3.1.4) is installed on the PC.
- On the PC, press [
Windows] +
R keys, enter the word "
control" and press [
Enter] key to open the Windows "Control Panel".
- Double-click on "Yamaha USB-MIDI Driver (WDM)" and set "Out 1" and "Out 2" to the "1" bus as already mentioned.
- On the keyboard, depress
Function > MIDI and confirm that it is set to the Preset MIDI template "
All Parts".
- Start
MixMaster and in
Setup > Select MidiDevice, select
Digital Workstation -1. (Digital Workstation -2 will
not work.)
Best regards,
Chris
[attachment deleted by admin]