Hi Ruud,
the E463 can record and also play Audio files with the following specification: File extension "
.wav",
44.1 kHz sampling rate,
16 bit resolution,
stereoNote: The wav files must be
stereo! You cannot use
mono wav files or MP3 files with the E463. So e.g. a "44.1 kHz / 16 bit /
mono" wav file will not work.
Please read the section "Audio Playback and Recording" in the E463 Owner's Manual (pages 41 - 43).
To load a wav file from the connected USB stick press the [
AUDIO] button to enter the Audio mode first. Follow the other instructions on page 41 of the manual please.
Audio files stored in the
root directory of the USB stick should definitely be recognized.
For Audio (wav) files, it is not mentioned in the manual that they can also be saved in
folders on the USB stick. According to the manual,
MIDI song files (.mid) are recognized in the
root directory as well as
first-level and second-level folders, as mentioned here:
>>>
https://www.psrtutorial.com/forum/index.php/topic,58015.msg449855.html#msg449855Maybe this also applies to wav files. You can just try it out. However, I recommend to ensure that no files with identical file names are saved multiple times (in different folders) on the USB stick.
P.S.
The manual says: "
While in Audio mode, some operations cannot be executed. When you are not playing back or recording Audio files, exit from the Audio mode."
Hope this helps!
Best regards,
Chris