... Don't know yet how to do that with the psr sx600 , probably with the computer connected.
Must figure this out what Yamaha software application is needed for transferring styles to computer
I must also load some psr 670 styles into the psr sx600
Hi janamdo,
first please read pages 25 - 30 of the SX600 Owner's Manual (Section "File Management").
You can simply COPY the Preset Styles to a connected USB flash drive ("USB stick"):
- Connect a USB stick to the USB-to-Device socket of the SX600.
- Press one of the Style category buttons (e.g. "Pop & Rock") to open the Style Selection display.
- Press "UP" (= upper "8" button) once to go one step up in the folder hierarchy.
- You should now see the Preset Style folders.
- Use "Copy" > "All" > [Enter ] (refer to page 29 of the Manual) to copy all the Preset Style folders to the internal clipboard.
- Go from the Preset tab to the "USB 1" tab (using the TAB buttons).
- Create a new folder named e.g. "sty SX600 Preset" on USB 1 (= the connected USB stick). Refer to page 27/28 of the Manual.
- Select this new created folder to go inside.
- Press "Paste". This will copy all Preset Style folders including all the Styles into this new folder on the USB stick. (Be patient, because this will take a while.
)
- That's it!
P.S.
You don't need to copy external Styles into the User drive of the SX600. Just copy the Styles (e.g. the S670 Styles) onto the USB stick (on the computer) and connect the stick to the keyboard. Then press one of the Style category buttons to open the Style Selection display (as also done before). Go to the "USB 1" tab, select the folder that contains the Styles. Now select the desired Style to LOAD it (and play with it).
Hope this helps!
Best regards,
Chris