Hi Folks:
I did some testing with this registration and the results are thus:
The registration initially seem to load fine, but selecting a second bank and button and the screen showed the same results as noted above, headings distorted and a portion with a blank screen.
I used YRM to remove the Live Control and Assignable Button sections of the registration, reset the keyboard and tried again and the registration loaded fine.
There is something wrong with either the Live Control or Assignable Buttons settings within this registration bank.
Each registration button now contains 15 sections for Live Control and one for Assignable Buttons along with 36 sections to contain Optional Screen Headings for the Live Control. There is a very large amount of data in these sections, and I suspect that there is something wrong somewhere in one or more of the sections.
SX900 and CVP809 are using the exact same registration format saved data. SX900 has two LC Knobs and no Sliders, but the data for these items are saved in the registration. CVP809 has no Live Control at all but the 52 sections of the registration are created.
My advice would be if you are using YRM to convert SX900 or CVP809 registrations for use on the Genos, use the YRM Duplicator to remove the Live Control and Assignable Button sections from the registration before performing the conversion.
Cheers,
Murray