... I easily can assign whatever to the assignable buttons no problem.....
but when I power off and restart they return to default settings?
How can I assign the buttons and save them so they never change?...
Hi Dnj,
the following "Assignable" settings can be stored in Registrations (by ticking the "Assignable Buttons" checkbox)
and also in the so called "System Setup":
- Assignable Buttons
- Assignable Buttons Detail Setting
- Rotary Sp/Assignable
- Rotary Sp/Assignable Detail Setting
Please refer also to the SX900 Data List, page 93 (chapter "Parameter Chart") for further information.
To save the settings made in the Assignable display properly (so that they are recalled when the SX900 is restarted), be sure to
CLOSE the "Assignable" display by touching the "X" symbol OR pressing the [Exit] button. If this display is still OPEN (even in the background) when restarting, your Assignable settings will NOT be saved in the "System Setup"!
However, since the Assignable settings can also be changed accidentally by (third-party) Registrations, I recommend that you save your preferred Assignable settings in one or more so called "Setup Registrations".
Best regards,
Chris