Hi Russ,
If you open the Mixer for a style and make changes to a part, say adjust the volume of the Rhy2 part in Main A, this change will then apply to all other sections of the style, and if you open Style creator and save the style, this is what will be saved. If this is what you want then fine.
However, if you want to limit changes to just one specific style section, then you must open the Style Creator before opening the Mixer.
With Style Creator open, on the Basic page check that the section shown is the one that you want to change and change it if necessary (you can use the panel buttons for any section except the Fill Ins).
Now, without exiting the Style Creator, open the Mixer . To do this, press Menu (Menu1) > Mixer and if necessary select the Style 1 page (I have Mixer assigned to an assignable button, but it does not work if Style Creator is open - nice one Yamaha
)!
When the Mixer is opened correctly within Style creator, the green 'part' indicators near the top of the display are 'greyed out' (see attached screen shot).
Now make your changes to the parts in that section.
If you want to change another section, select it (again using the panel buttons for all except Fill Ins) and change the parts as required. If you want to select a Fill In section, then unless anyone knows any different way, you will need to exit the Mixer by pressing Exit or touching the 'X' at the top right of the display - do not use the Home button! Repeat this Exit one more time to return to the Style Creator display.
Now select the desired section from the display and then open the Mixer again as above.
BTW, after you have made changes, you should see them reflected in the Mixer settings as you select different style sections.
Once you have finished editing the parts, or anytime that you want to save the modified style, return to the Style Creator display by exiting from the Mixer as above, and save the style.
Don't ask me why there is not a button in the Style Creator display for the Mixer - there is certainly plenty of space for it!
Also on the Tyros models (and PSRs?), when the Style Creator and Mixer (Mixing Console) are open, if you press a style section button, a small selection box pops up which allows you to select any style section, including the Fill Ins without needing to mess around returning to the Style Creator display. Perhaps Yamaha should have a look at how they used to do things to get some ideas to improve the efficiency of the Genos user interface!
Regards
Ian
[attachment deleted by admin]