Hi Don,
What you want to do
can be a little tricky and a
lot of work. There are a couple of BIG considerations to
merge the channel 9 drums with the channel 10 drums.
1. Firstly...
are the drum kits the same; if not then there will be a problem with playback when you copy ch9 drums to ch10 drums.
2. Second... Are the two channels set to the
same Volume? If not you will have to adjust the volume on ch9 drums to match channel 10 drums. If the volume is
different after you do that, then you will need to adjust the (global) Note Velocity up or down
by a percentage for ch9 to match the Volume of ch10 drums.
3. If both drum channels are using the same drum kit and once you have
the right volume balance for both channels, then you can copy channel 9 to channel 10. But I'm talking about ALL 15 Style Sections!
This can be done in
MixMaster, but it's my opinion that you can do these operations
much easier and faster with the
StyleMagic software.
But there is another option... You can add additional drums by using drum Multi Pads. You can create drum Multi Pads with the
PadMaker software by converting style drum parts to Multi Pads.
You can get PadMaker here:
http://psrtutorial.com/MB/padmaker.htmlRegards,
Joe H