Hello Churchill,
First check if the electrical outlet that supplies your TRS MS 01 works well with another device.
Then, if all the connections are good and have not been modified recently, it is possible that the small fuse inside the Yamaha TRS-MS01 is cut by old age and repeated power-ups.
Simply unplug the Yamaha TRS-MS01 from the mains and disassemble the rear panel held by 8 screws to access the internal printed circuit in order to see if the small standard fuse (Classic and clearly visible glass tube) which is on the electronic card is cut.
Simply replace it with the same value which, from memory, should be a 1500 mA (1,5 A) value, it is marked above.
Photo of the TRS MS 04 Fuse :
https://app.box.com/s/5dluhrcu9ri5ri4n7o1rc0g1hp68wpu1Yamaha should have placed a small diode on the front to indicate the correct mains power supply for the TRS MS 01.
Technically