Hello
I use USB cable from Yamaha directly to PC.
Have also tried with an M-Audio USB Controller with 2 cables 5 pole, but with the same result. However, I think that I would not receive anything if I had put the cables in the other way around.
When I record a SysEx message to the PC from my Yamaha PSR-SX700, the same SysEx code cannot be used to send back to the SX700.
Example.
Dump to PC Regi.Mem.(1)= F0 43 73 01 52 25 00 01 01 00 01 00 F7
If I want to send the same SysEx message back to the SX700, the SysEx must be called: F0 43 73 01 52 25 11 00 01 00 00 F7
Rec: F0 43 73 01 52 25 00 01 01 00 01 00 F7
Send: F0 43 73 01 52 25 11 00 01 00 00 F7
As you can see, there are some HEX codes that are not the same.
I have read the PSR-SX700_Engelsk_Data List.pdf document and especially from pages 103 - 117, but unfortunately it does not give me any explanation.
I will of course try to review the site at studio4all.dk
Sincerely
JAKI