Thanks Drake... I've checked the R M content an all is in order and this "Blasted" VocoderXG is not in any of the 8 R M... However... that action has given me a partial solution, thus,
I have set the two Harmony types I use into R M 1 and 2 so when I now select a song to perform I simply press 1 or 2 in the R M and that overrides the VocoderXG..
Just another button the press but I can live with that
Thank's again
Hi Butterflyman,
Have you
really checked whether your Registrations do not load a MIDI file (= MIDI song) that contains the "wrong" VH settings? (Please look in the Main display next to button "A".)
The behavior you describe clearly suggests this: Pressing Reg button #1 loads such a MIDI file (which sets "Vocoder XG"). If you press another Reg button in which the
same MIDI file is linked (or if Reg button #1 is pressed a SECOND time), the VH settings
memorized in the relevant REG now will be set (because an
already loaded MIDI file will NOT be loaded again).
Please note in this context: If you edit and resave MIDI song files in
Song Creator, the checkbox "VH/MIC" must NOT be ticked in "Song Creator > Channel > Setup" before pressing "Execute", otherwise the current VH settings are saved
to the MIDI file. (Normally only the 7 checkboxes "Voice" to "EQ" (at the top next to "SONG") should be ticked.) See also the Tyros4 Reference Manual, pages 70 and 72.
Best regards,
Chris