Topic: Can you copy the OTS from one style to another?

[MusicMan]

Hi

Can you copy the OTS from one style to another?

Angelo

[Stijn]

Load the style that has the OTS you want to copy from. Press the OTS# button.

Load the destination style.
Press [MEMORY] followed by [OTS#] to store these values in that OTS button.
SAVE the style.

======
Multiple OTS copies using a Registration bank:

Load the style that has the voices you want to copy.
Load an empty registration file.

Press the first OTS button [OTS1] to load the voices.
Press [MEMORY] to save these settings in the first registration button [R1]. Before pressing [R1], however, make sure that only the VOICE, MULTIPAD, and HARMONY groups are checked and then press [R1].

Repeat this process for OTS2, OTS3, and OTS4 saving the results to R2, R3, and R4.

Load the style that you want to save these OTS in.
Press [OTS1] to load the current OTS1 setting.

Press [R1], which loads the voices stored in the first registration memory.
Press [MEMORY] followed by [OTS1] to store these values in the first OTS button.

Repeat for OTS2, OTS3, and OTS4.

SAVE the style.

Stijn

[overover]

Hi Angelo,

You can also use Jørgen Sørensen's PC (Windows) program "OTS Editor" to copy OTS to other styles.
>>> http://www.jososoft.dk/yamaha/software/otseditor/index.htm

However, I would do this directly on the keyboard, as described by Stijn. This way you can hear the result directly and, if necessary, adjust the settings before saving the new style.


P.S.
Note that JRE (Java Runtime Environment) ver. 8 is required (must be installed on the PC) for the "OTS Editor" program to work. Please click on "Get JRE" for more information (in the "Updates" section further down on the linked page).


Best regards,
Chris

[DrakeM]

The "Voice" will be copied but the effect TYPE found on the Console Mixing (Panel) is not copied.

Which I notice a lot with the guitar and piano voices. If the voice setup doesn't sound the exact same this will be the issue.
I have not figure out how to setup that part into the new style you are editing other than to MOVE all the style parts by "Copying and Pasting" them into the style which has the Voice setup you want.

But in the majority of cases you will not notice any difference.

Regards
Drake 

[MusicMan]

Thank you all for the help with this.