I am getting no sound if the headphones are unplugged but can hear it through the headphones. Any suggestions? Have tried a reset and that didn't do it.
Hi Bell140,
Please check the following setting:
In "Function > Utility > Config 2" the "Speaker" parameter must be set either to "Headphone SW" (speaker sound is cut off when headphones are plugged in) or to "ON" (speakers are always on). be. With "OFF" the Tyros3 speakers are always off.
If the "Speaker" parameter is not set to "OFF" here, check that the TRS-MS03 speaker system is connected properly.
Hope this helps!
Best regards,
Chris