Topic: Audio Interface Feedback Loop?

[Michael Trigoboff]

I just got my audio interface (FocusRite Scarlett 8i6) yesterday and hooked it up. Things are working, but I think I have a problem.

I have the digital audio output of the Genos hooked up to the digital audio input of the 8i6. I have analog audio coming out of the 8i6 going into the AUX analog inputs of the Genos.

I tried recording audio from the Genos on my PC in Cubase. It worked, but the audio level was very low. So I adjusted the Genos digital audio output up to +6dB. That improved things, but not enough. So I adjusted it up to +12 dB.

At that point, the audio level indicators in Cubase went up to maximum over the course of about two seconds and stayed there. This makes me think that I have some kind of feedback loop going on, possibly that the AUX input to the Genos is going right back out on the digital audio output.

Is it possible that this is going on? If so, is there some setting that disconnects AUX input from the digital audio output?

[Toril S]

Are you using unbalanced cables from Genos to the interface?

[Michael Trigoboff]

RCA plug S/PDIF from Genos to 8i6, unbalanced 1/4” from 8i6 to Genos.

[Michael Trigoboff]

Figured it out. I had it wired wrong. It needed to be connected like this:

EDIT: Arrow from Genos to audio interface needed to be blue.

[attachment deleted by admin]

[Toril S]

Great😀

[Michael Trigoboff]

By the way, with this setup, the Genos volume control knob does nothing. I am controlling volume via the volume control knob on the audio interface.