Author Topic: Struggling to change default settings of footpedals  (Read 1869 times)

0 Members and 1 Guest are viewing this topic.

Offline chesterkins

Struggling to change default settings of footpedals
« on: January 28, 2022, 08:10:04 PM »
Hi
How can you change the default settings of the foot pedals on the Genos
I want to set them as follows
1)  Articulation 2
2) Fill self
3) Intro 2
but every time I change registration or style They change back to
1) articulation 1
2) Fill self
3) volume     
What to do??
 

Offline Fred Smith

Re: Struggling to change default settings of footpedals
« Reply #1 on: January 28, 2022, 09:37:42 PM »
Hi
How can you change the default settings of the foot pedals on the Genos
I want to set them as follows
1)  Articulation 2
2) Fill self
3) Intro 2
but every time I change registration or style They change back to
1) articulation 1
2) Fill self
3) volume     
What to do??

The Genos will remember pedal settings, so you don’t have to use registrations to do so.

Your problem is you’ve told your registrations to set the pedal settings, so they’re doing what they’ve been told. You need to re-memorize the offending registrations, telling them not to set the pedal (ie, ensure the Pedal box is unchecked ).

Cheers,
Fred
Fred Smith,
Saskatoon, SK
Sun Lakes, AZ
Genos, Bose L1 compacts, Finale 2015
Check out my Registration Lessons
 

Offline chesterkins

Re: Struggling to change default settings of footpedals
« Reply #2 on: January 29, 2022, 10:31:11 AM »
Thanks Fred
But its for styles too   
Always seems to go back to the 'default setting'
 

Offline Fred Smith

Re: Struggling to change default settings of footpedals
« Reply #3 on: January 29, 2022, 10:43:15 AM »
Thanks Fred
But its for styles too   
Always seems to go back to the 'default setting'

So, what happened when you re-memorized your registration?

Cheers,
Fred
« Last Edit: January 30, 2022, 05:26:57 PM by Fred Smith »
Fred Smith,
Saskatoon, SK
Sun Lakes, AZ
Genos, Bose L1 compacts, Finale 2015
Check out my Registration Lessons
 
The following users thanked this post: chesterkins

Offline overover

Re: Struggling to change default settings of footpedals
« Reply #4 on: January 29, 2022, 03:15:43 PM »
Thanks Fred
But its for styles too   
Always seems to go back to the 'default setting'

Hi  chesterkins,

Styles cannot change Pedal settings, only Registrations can do this.

Note: After changing the Pedal settings manually, be sure to CLOSE the Assignable display properly (by touching the X symbol or pressing the Exit button). This will save the current Pedal settings in the so-called System Setup, and your settings will be there also after a restart. BUT, as mentioned, Registrations always can change the Pedal settings if different settings were memorized in it.


If you want to make sure that the pedal settings are not changed by Registrations, you can use the Freeze function:

- Press [Direct Access] > [Freeze] to open the Freeze settings and make sure only the "Pedal" box is ticked. CLOSE the Freeze settings display.

- If you now switch on the Freeze function (LED of the Freeze button lights up), the current Pedal settings are locked.


Best regards,
Chris

« Last Edit: January 29, 2022, 03:18:31 PM by overover »
• They always said: "This is not possible!" - Then someone came and ... just did it!
• Never put the manual too far away: There's more in it than you think! ;-)
 
The following users thanked this post: chesterkins