Author Topic: Settings change,  (Read 528 times)

0 Members and 1 Guest are viewing this topic.

Offline Colin D

Settings change,
« on: December 28, 2021, 06:43:07 PM »
My Genos settings changed for some bizarre reason, the registration step turned off and my foot switch changed polarity.

I had plugged a digital converter in to the Digital out port, very strange, has anyone had similar?

Many thanks

Colin
Previous, Technics E44, E66, U90, G7, GX7 G100, Tyros 2, Tyros 5, now Genos,

https://www.youtube.com/channel/UCNozAL1Whf-t4TJY5wPK57Q
 

Offline overover

Re: Settings change,
« Reply #1 on: December 28, 2021, 08:34:43 PM »
Hi Colin,

Have you perhaps performed a System Reset (by holding down the right-most white piano key when switching on)? This would automatically turn off the Registration Sequence function.

You can quickly call up the Registration Sequence display with [Direct Access] > [Memory] (and switch it back to "ON").

Regarding pedal polarity: Please make sure not to press/move a pedal during the boot process, as this can lead to the polarity being reversed. If necessary, you can set the pedal polarity manually: [Direct Access] > press the pedal > touch the "Menu" icon


Hope this helps!

Best regards,
Chris
They always said: "This is not possible!"  Then someone came and - just did it!

Never put the manual too far away.  There's more in it than you think!