Hi all,
I ask all Genos users to check after the update to Firmware version 2.10 whether the "Live Control" display can be called up normally (Menu1 > Live Control). IF this works, everything is OK. If you get an "Unexpected Error" please read the following:
Obviously there is a bug in Genos Firmware version 2.10, which can cause the Genos OS to crash when calling up the "Live Control" display (Menu1 > Live Control) if the previous Live Control configuration (adopted during the update) is not compatible with V2. 10. At the moment, however, I do not yet know which (earlier) Live Control setting is exactly the reason for the crash.
In my case, when I tried to call up the Live Control display (using all of the methods mentioned), the following error message appeared and the Genos had to be restarted. (See also the attached picture.)
Unexpected error - turn the power off and on again.
SRJOML
L11
Solution:
If the error described occurs (when trying to call up the "Live Control" display), the problem can be solved as follows:
- Menu2 > Utility > Factory Reset/Backup > page 1/2
- Make sure that only the checkmark "Live Control" is set (!)
- Touch the "Factory Reset" button.
- It is best to go to page 2/2 > "Setup Files" and save the current "System" file in the User drive and/or on a USB stick. (File name e.g. "System Setup V2.10").
Note: The Live Control settings are saved in the System Setup, but can, as described, be reset independently of a System Reset if necessary.
P.S.
The Live Control display can be accessed using the following methods. If the error described occurs, then with ALL of these methods:
- Menu1 > [Live Control]
- Home display > Home Shortcut [Live Control]
- [Direct Access] > move one of the Live Control Knobs or Sliders
- [Direct Access] > press [Knob Assign] button
- [Direct Access] > press [Slider Assign] button
Best regards,
Chris
[attachment deleted by admin]