Author Topic: Breath control  (Read 599 times)

0 Members and 1 Guest are viewing this topic.

Offline PAFF

Breath control
« on: December 13, 2021, 05:05:20 PM »
Is it possible to assign line output for brass and woodwind voices?
 

Offline mikf

Re: Breath control
« Reply #1 on: December 13, 2021, 05:07:49 PM »
If you mean for only those voices then no.
Mike
 

Offline Fred Smith

Re: Breath control
« Reply #2 on: December 13, 2021, 05:27:44 PM »
Is it possible to assign line output for brass and woodwind voices?

You can assign outputs to Right1, Right2, Right3, etc.

If you always assigned brass and woodwind to Right1, for example, and other voices to Right2 or Right 3, then you could make it work.

Cheers,
Fred
Fred Smith,
Saskatoon, SK
Sun Lakes, AZ
Genos, Bose L1 compacts, Finale 2015
Check out my Registration Lessons
 

Offline PAFF

Re: Breath control
« Reply #3 on: December 13, 2021, 05:58:57 PM »
Thankyou for the advices. I just realized that line out setting can be stored in the registration in other words that I can assign for instance a sax to sub out in memory 1 and a piano to line out in memory 2 and so on.A mixer is of course necessary.
 

Offline overover

Re: Breath control
« Reply #4 on: December 13, 2021, 08:10:24 PM »
Hi PAFF,

Please note that only Insertion Effects can be applied to the sound output from the SUB output jacks. System Effects (Chorus, Reverb, and Variation Effect when is set to "System") will NOT be applied.

It should also be noted that the SUB output jacks have a fixed volume, i.e. they are NOT affected by the master volume control.


Best regards,
Chris
They always said: "This is not possible!"  Then someone came and - just did it!

Never put the manual too far away.  There's more in it than you think!
 

Offline PAFF

Re: Breath control
« Reply #5 on: December 14, 2021, 12:48:03 PM »
Thankyou all for the good advices. I decided to find another solution.
Best regards
Pär