Author Topic: Exploring the Genos - Multipads  (Read 1713 times)

0 Members and 1 Guest are viewing this topic.

Exploring the Genos - Multipads
« on: August 20, 2021, 10:28:21 AM »
Hi one and all,
As I continue to explore my new Genos to better understand how it all works, I was investigating how multipads work and from what I can fathom out, the only way I can change the voice of a multipad is to go into multipad recordings then step edit and change the program number (so you have to look up the program number before you start), now this seems a bit fiddly as other voice changes are always found via an icon to select a voice allowing you to pick and choose as you wish. Am I missing something somewhere or is that the only way?
Thanks all
Retired IT
 
The following users thanked this post: GaryZ

Offline EileenL

Re: Exploring the Genos - Multipads
« Reply #1 on: August 20, 2021, 01:18:06 PM »
 When you are in record of multi pad. Select the pad you want and then press Step. You will now see near the top the number of the voice being used. Highlight this and then press the Voice button. This will show you the voice being used and if it is a Megga voice or not. You can now select another voice from the categories on the left of the screen. You will now see the new prog number under the original one which you will need to delete before re-saving. It is very quick too do.
 
The following users thanked this post: MrSteveVee

Re: Exploring the Genos - Multipads
« Reply #2 on: August 20, 2021, 04:44:59 PM »
When you are in record of multi pad. Select the pad you want and then press Step. You will now see near the top the number of the voice being used. Highlight this and then press the Voice button. This will show you the voice being used and if it is a Megga voice or not. You can now select another voice from the categories on the left of the screen. You will now see the new prog number under the original one which you will need to delete before re-saving. It is very quick too do.

Aha! I see what you mean and now understand how it works, thanks Eileen that was extremely helpful
Steve
Retired IT
 

Offline overover

Re: Exploring the Genos - Multipads
« Reply #3 on: August 20, 2021, 11:25:06 PM »
Hi Steve,

If the Voice Numbers (# MSB-LSB-PRG) are not shown in the Voice Selection Display of the Genos, touch the "Menu" icon and then "Voice Number". There you can switch on showing the Voice Numbers.


Best regards,
Chris
➪ Everyone kept saying "That won't work!" - Then someone came along who didn't know that and just did it.
➪ Never put the manual too far away: There's more in it than you think! ;-)
 
The following users thanked this post: MrSteveVee

Re: Exploring the Genos - Multipads
« Reply #4 on: August 22, 2021, 05:17:55 PM »
Hi Steve,

If the Voice Numbers (# MSB-LSB-PRG) are not shown in the Voice Selection Display of the Genos, touch the "Menu" icon and then "Voice Number". There you can switch on showing the Voice Numbers.

Ooo nice tip, thanks chris
Retired IT