Author Topic: PSR 950 Sustain on/off  (Read 310 times)

0 Members and 1 Guest are viewing this topic.

Offline kutzkdd

PSR 950 Sustain on/off
« on: August 13, 2021, 09:44:02 PM »
  Hi,
            Once turned on, can the degree of sustain be adjusted on the PSR 950 ? 


                                           Rich
 

Offline travlin-easy

Re: PSR 950 Sustain on/off
« Reply #1 on: August 16, 2021, 03:03:53 AM »
Press the Direct Access Button and then step on the pedal. This will bring up the page for the pedal and there you can make the adjustments you wish.

Good luck,

Gary  8)
Love Those Yammies...
 

Offline overover

Re: PSR 950 Sustain on/off
« Reply #2 on: August 16, 2021, 07:52:01 AM »
  Hi,
            Once turned on, can the degree of sustain be adjusted on the PSR 950 ? 


                                           Rich

Hi Rich,

if you are talking about the Panel Sustain button: In the Voice Set (Effect/EQ page) of each voice (can be accessed from the Voice Selection display) you can set the value that should be effective when the Panel Sustain function is switched on.

You can either save the edited Voice as a User Voice, or just memorize the changed setting to a Registration (with the "Voice" checkmark).


P.S.
In order to achieve a permanent "Sustain" effect WITHOUT having to switch on the Panel Sustain function, you can just slightly increase the value of the parameter "SOUND > EG > RELES." (= Release Time of the Amp Envelope) in the Voice Set of the voice concerned.


Best regards,
Chris
« Last Edit: August 16, 2021, 07:56:09 AM by overover »
Everyone always said: "This is not possible!" - Then someone came and ... just did it!