Author Topic: Adding a Fade-Out  (Read 2356 times)

0 Members and 1 Guest are viewing this topic.

Offline Luluc

Adding a Fade-Out
« on: August 11, 2021, 04:11:03 PM »
Hi all,

How to add a Fade-Out at the end of a song already recorded without recording again the whole song ?
For ex. my song has 80 bars recorded. I want to add a Fade-out from the bar#70 for all the tracks of the MIDI song.

Thx,
« Last Edit: August 11, 2021, 05:10:38 PM by Luluc »
Luluc
-------------------------------------------------------------------------------------
Yamaha Genos - Focusrite Scarlett 8i6 - Behringer FCB1010 - AKG K92
 

Offline Fred Smith

Re: Adding a Fade-Out
« Reply #1 on: August 11, 2021, 06:22:50 PM »
How to add a Fade-Out at the end of a song already recorded without recording again the whole song ?
For ex. my song has 80 bars recorded. I want to add a Fade-out from the bar#70 for all the tracks of the MIDI song.

On a PC, you can use MixMaster.
On the keyboard, you can use punch in/punch out.

Cheers,
Fred
Fred Smith,
Saskatoon, SK
Sun Lakes, AZ
Genos, Bose L1 compacts, Finale 2015
Check out my Registration Lessons
 

Offline Luluc

Re: Adding a Fade-Out
« Reply #2 on: August 11, 2021, 07:19:57 PM »
Thanks so much Fred,
I prefer to work on the keyboard, so I will use the punch in/out.
Luluc
-------------------------------------------------------------------------------------
Yamaha Genos - Focusrite Scarlett 8i6 - Behringer FCB1010 - AKG K92
 

Offline Luluc

Re: Adding a Fade-Out
« Reply #3 on: August 12, 2021, 03:32:19 PM »
Fred,

I set :
Rec Start : Punch in At bar 70
Rec Stop : Punch out At bar 76

Then I play in Rec mode and at bar#70, I hit the F assignable key to get the Fade-Out function.
It don't work.
Have a more detailed procedure ?
Luluc
-------------------------------------------------------------------------------------
Yamaha Genos - Focusrite Scarlett 8i6 - Behringer FCB1010 - AKG K92
 

Offline Luluc

Re: Adding a Fade-Out
« Reply #4 on: August 16, 2021, 04:55:48 PM »
Bump

My conclusion is we can't do this with the Genos because the punch-in function deletes the present notes. Any other comment for adding a Fade-Out on the Genos ?

We can do this using MixMaster or a DAW.

Rgds,
« Last Edit: August 16, 2021, 04:58:57 PM by Luluc »
Luluc
-------------------------------------------------------------------------------------
Yamaha Genos - Focusrite Scarlett 8i6 - Behringer FCB1010 - AKG K92
 

Offline Amwilburn

Re: Adding a Fade-Out
« Reply #5 on: August 16, 2021, 06:21:00 PM »
Correct, you have to add the fadeout *while* playing; just pressing the fadeout button does nothing if there are no notes being played afterward.

If you've already got an existing recording, yes you can add a fade out manually after the fact without interfering with your existing notes, by going into the midi data, and manually add a volume change every beat or so (and go from whatever the current channel volume is to 0 over the desired length of bars, but at that point it's simpler to just do it through software, as you need to add the same fade data to all tracks.

Mark


Offline Luluc

Re: Adding a Fade-Out
« Reply #6 on: August 17, 2021, 05:46:59 PM »
Many thanks  Mark to confirm my newbie conclusion.  :)
Luluc
-------------------------------------------------------------------------------------
Yamaha Genos - Focusrite Scarlett 8i6 - Behringer FCB1010 - AKG K92