Hi imzain786,
if you don't have the S970 Service Manual, please download it here:
>>>
https://psrtutorial.com/lessons/workshops/ServiceManuals.htmlThe only thing you can do yourself would be to start the internal Test Program and execute the following test routines (including a complete Factory Reset):
- Start the Test Program (using one of the two methods described on page 39 in the Service Manual.
- Execute test "
002 : Memory Check1 All". (It's best to take a photo of each error message.)
- If the result is OK, execute "
083 Test Exit" and check whether the S970 restarts normally now or not.
- If the result of test No. 002 is NG, execute the tests
003 - 009 (simplified ROM/RAM checks). Probably "005 : RAM Check1" will fail (NG).
- Execute the tests
067 - 073 (complete ROM/RAM checks). Probably "069 : RAM Check2" will fail (NG).
- Execute "
081: Factory Set".
- Execute "
083 : Test Exit". The S970 should restart now and "Force Format Mode" should be shown for a while.
If you're lucky, the S970 now works normally again. But if you get the error message "Main SD RAM ... NG" again, only Yamaha support will be able to help you. The mainboard would probably have to be replaced.
The ICs mentioned are all on the S970's mainboard (DMH circuit board). However, this spare part is not cheap: at the German company "
www.audio-service.com" the DMH board of the S970 (Part No. ZN123700) costs around 415 euros ...
Hope this helps!
Best regards,
Chris