Hi Fred,
You probably only used the "wrong" sockets on the T5: You should use the "
Line Out MAIN R and
L/L+R" sockets on the Tyros5 (i.e. NOT the "Line Out SUB" or "Aux Out" sockets, and of course NOT the "Aux In" sockets).
See the first attached picture!First of all, however, please
check the Line Out Settings (MIXING CONSOLE > Tab LINE OUT). Make sure that
all Parts resp. Drum Instruments (scroll down using button #1!) are checked in the FIRST column
on both pages (PANEL and DRUM & PERC.).
See the second attached picture!Regarding Tyros5 Master EQ:I recommend using either the Master EQ preset "Flat" or "Line Out". The preset "TRS-MS05" is intended for the original T5 loudspeakers and is not ideal for other / larger external speakers. In principle, however, it has to work with any master EQ settings.
You can also select multiple EQ presets
on your speaker system (using the remote control). Just use the EQ combination that you like best. In the T5 Master EQ you can, if necessary, based on the currently set preset, make further EQ settings (and save as a User EQ type if desired).
Now it should work as expected.
P.S.
Normally you should turn up the Master Volume on the Tyros5 at least half way (12 o'clock). If you have a distorted sound through the speakers, reduce the master volume on the Tyros5. If the sound is ok, you can turn up the Tyros5 even louder if necessary.
Best regards,
Chris
[attachment deleted by admin]