Author Topic: Registration Bank: send a message from daw to 975 to change bank. SOLVED  (Read 4373 times)

0 Members and 2 Guests are viewing this topic.

Offline bernamato

Hi.
I red a post from overover that it would be possible to change a registration bank send a message (cc, sysex?) from daw to 975, genos and tyros.
someone could help me?
tks
« Last Edit: May 17, 2021, 08:29:32 PM by bernamato »
 

Offline Wim NL

You can do this with Sysex or by note see External controller tab in in the midi setup

You tube :
How to make a «CONTROL TRACK» for MIDI-Files - like Technics KN-5000
https://www.youtube.com/watch?v=22denN_MiMM

Remote Registration Banks and Registrations via MIDI (SysEx Method), YAMAHA GENOS & SX
https://www.youtube.com/watch?v=BybqG5op6Lk

Registrierbänke von externer Quelle via MIDI aufrufen
https://www.youtube.com/watch?v=4VJvnLL5GB0

Here the sysex commands:

Regist 1   F0   43   73   01   52   25   00   01   01   01   00   F7
Regist 2   F0   43   73   01   52   25   00   01   01   01   01   F7
Regist 3   F0   43   73   01   52   25   00   01   01   01   02   F7
Regist 4   F0   43   73   01   52   25   00   01   01   01   03   F7
Regist 5   F0   43   73   01   52   25   00   01   01   01   04   F7
Regist 6   F0   43   73   01   52   25   00   01   01   01   05   F7
Regist 7   F0   43   73   01   52   25   00   01   01   01   06   F7
Regist 8   F0   43   73   01   52   25   00   01   01   01   07   F7
Regist 9   F0   43   73   01   52   25   00   01   01   01   08   F7
Regist 10   F0   43   73   01   52   25   00   01   01   01   09   F7


Best Regards,
Wim
 
The following users thanked this post: YeeL

Offline bernamato

I red the manual data list of the psr 975 and sysex command with no success. Could you send where can I find the sysex that you listed above? Many tks.
 

Offline bernamato

Ok, done!
I have adopted the note solution instead of sysex. I use Ableton. Two solutions on midi control:
1) use the midi clip to send bank=1; sub= n it depends which registration you would like to use. In the same folder you need to put all registration bank; pgm =depends which registration number bank you would like select.
2) use a max4live module named "Programchanger.amxd" (https://maxforlive.com/library/device/4051/program-changer): MSB=1; LSB=n depends which registration you would like to use. In the same folder you need to put all registration bank; Program Change: depends which registration number bank you would like select.
On Ableton, send midi to psr975 usb2 ch 1
On PSR, set up MIDI USB2 to receive on USB 2, track 1, "Keyboard".

What purpose does it serve?
If you want to program some ableton scenes to send the registration and the bank number stored within the registraton this allows you to automate the style, voices, volumes etc. It is not a small thing!

Many thanks
« Last Edit: May 17, 2021, 09:12:15 PM by bernamato »