Author Topic: Genos styles on SX-700/900  (Read 1021 times)

0 Members and 1 Guest are viewing this topic.

Offline pedro_pedroc

Genos styles on SX-700/900
« on: May 11, 2021, 10:01:08 PM »
Hello, everyone.

If I have a style created on Genos, can it be played in SX-700/900 without conversions?

Because, Genos may have more sounds that "lower" keyboards haven't... Will SX series replace the voice automatically with another compatible voice?

Thank you!

Pedro
Pedro Eleutério
PSR Performer
Check My YouTube Channel

"Our thoughts strayed constantly and without boundary"
 

Offline mikf

Re: Genos styles on SX-700/900
« Reply #1 on: May 11, 2021, 10:15:39 PM »
Yes
 

Offline pedro_pedroc

Re: Genos styles on SX-700/900
« Reply #2 on: May 12, 2021, 12:49:16 PM »
Ok.

But in the SX the genos style need some adjustments ?
Pedro Eleutério
PSR Performer
Check My YouTube Channel

"Our thoughts strayed constantly and without boundary"
 

Offline mikf

Re: Genos styles on SX-700/900
« Reply #3 on: May 12, 2021, 01:32:48 PM »
They are compatible keyboards, but there are of course some differences in sound systems and voices. For most people and most styles probably not significant. Whether you want to make some adjustments to the overall sound of the style on a different board will be a personal choice rather than a requirement.
The word “conversion” in my book has a somewhat different meaning, inferring it will not work properly or at all unless converted. Not the case here.
Mike
 

Offline pedro_pedroc

Re: Genos styles on SX-700/900
« Reply #4 on: May 12, 2021, 06:34:34 PM »
Thank you so much, Mike!

Pedro
Pedro Eleutério
PSR Performer
Check My YouTube Channel

"Our thoughts strayed constantly and without boundary"
 

Offline Aquilauno

Re: Genos styles on SX-700/900
« Reply #5 on: May 12, 2021, 07:53:49 PM »
Sorry Mike and Pedro, I need about a clarification, I have sx900 and when I load some styles (of other keyboards, I presume T4, T5; Genos), sometimes some voices of the OTS remain empty, in some cases Is that voice that is selected for play with the right hand  and therefore no sound, for this I have to change manually ... In these cases the SX900 don't finds me replacement entries automatically ... where am I wrong?
Thanks you.
Pietro
 

Offline johan

Re: Genos styles on SX-700/900
« Reply #6 on: May 12, 2021, 08:17:16 PM »
You are right, Aquilauno: the replacement of voices is only done for the instruments that play the style parts and in general this works quite well on the SX700/900 but it is not done for the OTS voices. Note however, if the OTS leds do not light up, it simply means that no OTS has been programmed in the style. If the lights turn on but no voice is heard, you can use the OTS viewer of Jorgen Sorensen to view the Genos voices that are foreseen in the OTS (select keyboard model = Genos) and then try to find matching voices on the keyboard or via the OTS Editor program (also made by Jorgen). The OTS editor also allows you to copy OTS voices from one style to another (OTS Mixer). Finally, you can of course also simply ignore the OTS and select the voices at your own taste.
SX700 and E433 (only in use for going to the music school)
Former keyboard: E463
 
The following users thanked this post: Aquilauno

Offline mikf

Re: Genos styles on SX-700/900
« Reply #7 on: May 12, 2021, 08:40:46 PM »
I’m not a fan of OTS. I can understand why someone might use it on a song specific or customized style, as a neat way to save a set up rather than a registration, - but on a generic style, never made sense to me.
 And I generally keep it turned off because if you don’t, and you change style variations, your lead voice changes without warning to something you didn’t want or expect.
Mike
 
The following users thanked this post: Aquilauno