Well I tinkered about with the settings and now the Microphone don't work. Any ideas ton how to reset it to working again anyone please,
Hi Colin,
make sure the Mic Gain knob is set properly (so that the LED is flashing green or orange but not red when speaking/singing into the Mic) .
Make sure the Mic volume is not set too low (by one of the pre-programmed Sliders or in the Mixer display or in the Mic Setting display or in the Vocal Harmony display). Check also that the "Lead" and "Harmony" volume is not fully turned down in the Vocal Harmony display.
Make also sure the Mic is not switched off by the corresponding button in the Mic Setting display (on the top left).
The Vocal/Talk switch (in the Mic Setting) should be set to Vocal. In addition, I would leave leave the Mic Noise Gate and also the Mic Compressor switched off for now, at least while you are making the basic mic settings.
Best regards,
Chris