Tyros Keyboards (5 Boards) > Tyros 5 (SFF2)
Configuring Left Pedal
Apollo292:
Hi All.
how do you configure an FC5 left pedal to bring in a Break and ending on Tyros 5.
I have a right pedal working on my registrations,but cannot find how to do this on the left in the manual.
regards
Daryl
Fred Smith:
--- Quote from: Apollo292 on April 28, 2021, 05:15:13 PM ---Hi All.
how do you configure an FC5 left pedal to bring in a Break and ending on Tyros 5.
I have a right pedal working on my registrations,but cannot find how to do this on the left in the manual.
regards
Daryl
--- End quote ---
It's in the Controller in Utility. But the easiest way to access it is to press Direct Access, then tap your pedal. Then you will see the menu of options.
Note that you can assign either Break, or an Ending, but not both, to the pedal.
Cheers,
Fred
Apollo292:
Thanks Fred for your kind reply.
Do I understand that only 1 event can be programmed in a registration with a left pedal.
regards
Daryl
mikf:
Only one event at a time can be set on any pedal, left pedal is no different. But you can have different pedal settings and save them in separate registrations.
mike
johan:
Indeed, as Mike suggests you can change the left pedal setting in each registration so that each time you use the right pedal to switch between registrations it also changes the programming of the left pedal as defined in your registrations.
Navigation
[0] Message Index
[#] Next page
Go to full version