PSR Keyboards (11 Boards) > PSR-S970/S770/S670 (SFF2)
Help! Foot Pedal 2 Stopped Working
alanclare:
I have a footswitch controller connected to each of the two sockets on my s970. They've been there since I bought the instrument. Foot pedal 2 has stopped working while I was playing. The fault is not the Pedal because it works OK in pedal 1 socket. Also the pedal connected to socket 1 doesn't work in socket 2. The fault lies in socket 2.
Turning the machine off and on has no effect.
What do I do, please?
Alan
Toril S:
Try a soft reset by holding down the rightmost white key while powering up the keyboard. But first check if the settings of pedal 2 has been changed for instance by a registration. Press direct acess and step on pedal 2 to see if the pedal is set on the function you want.
alanclare:
Toril
Brilliant. It was the reset that did the trick. I’ve yet to fully test it, but first appearances look good. I’ll report later.
In the meantime - thanks, my friend.
Alan
Toril S:
Alan, glad I could help!😀😀
Joe H:
Alan,
Did you load a registration in your keyboard that caused the foot pedal assignment to change? That's usually what happens when people load a 3rd party registration.
Joe H
Navigation
[0] Message Index
[#] Next page
Go to full version