MixMaster not controlling keybaord mixer

[RichS73]

Hi everyone,

Was wondering if anyone has any experience of using MixMaster
https://psrtutorial.com/MB/mixMaster.html

I can't get the mixer in it to control the mixer on my PSR-s670.
My DAW can so its something within the Mixmaster software.

I can get Mixmaster to play a MIDI file through my keyboard and it can change the sounds on particular channels
Thanks for help
from
Richard

[Normanfernandez]

Mixmaster cannot do that.

[RichS73]

It must be meant to, what else would the mixer be for?

[overover]

... Was wondering if anyone has any experience of using MixMaster
https://psrtutorial.com/MB/mixMaster.html

I can't get the mixer in it to control the mixer on my PSR-s670.
My DAW can so its something within the Mixmaster software.

I can get Mixmaster to play a MIDI file through my keyboard and it can change the sounds on particular channels. ...

Hi Richard,

for some reason, the Mixer of MixMaster obviously uses Port 2 of the Yamaha USB-MIDI Driver.

You can do as stated on page 35 of the MixMaster Manual: Call up the GUI of the Yamaha USB-MIDI Driver set both "Out 1" and "Out 2" to the "1" bus. (See also the attached picture.)


- Make sure that the keyboard is connected to the PC via a USB type AB cable (and the keyboard is switched on) and the Yamaha USB-MIDI Driver (V3.1.4) is installed on the PC.

- On the PC, press [Windows] + R keys, enter the word "control" and press [Enter] key to open the Windows "Control Panel".

- Double-click on "Yamaha USB-MIDI Driver (WDM)" and set "Out 1" and "Out 2" to the "1" bus as already mentioned.

- On the keyboard, depress Function > MIDI and confirm that it is set to the Preset MIDI template "All Parts".

- Start MixMaster and in Setup > Select MidiDevice, select Digital Workstation -1. (Digital Workstation -2 will not work.)


Best regards,
Chris

[attachment deleted by admin]

[RichS73]

That's great thanks Chris, I will try it tomorrow.

[Normanfernandez]

From what I understand. He wanted it to work in real time.

[tyros5psr]

thank you very interesting day

[Wim NL]

- Make sure that the keyboard is connected to the PC via a USB type AB cable (and the keyboard is switched on) and the Yamaha USB-MIDI Driver (V3.1.4) is installed on the PC.

The USB-MIDI Driver (V3.1.4) is an old one I suppose, it is from 2015

At the Yamaha site I find the latest is V2.0.4 for Windows and V2.0.5 for Mac

https://europe.yamaha.com/en/products/contents/keyboards/downloads/firmware_software/index.html?c=keyboards&k=midi

[RichS73]

It works! Thanks everyone (Especially to Chris)

Norman - It works in real time.

Thanks

[Wim NL]

Thank to Casper for this video:

https://www.youtube.com/watch?v=U9yOmmYcxxw

[Normanfernandez]

My bad.