Author Topic: s970 can not booting  (Read 1838 times)

0 Members and 1 Guest are viewing this topic.

Offline hoxuthi

s970 can not booting
« on: January 30, 2021, 03:35:27 AM »
My PSR-s970 when power up screen just  turn on logo and off then turn on logo then off,  forever, nothing else I can do . someone have any idea how can I fix it ? Thank you so much.

Offline Normanfernandez

Re: s970 can not booting
« Reply #1 on: January 30, 2021, 09:41:46 AM »
Try a system reset
Norman Fernandez Keyboardplayer

PSR S770 - Roland FP 30 - PSR 280
Cubase - Kontakt6
The following users thanked this post: hoxuthi

Offline tyros5psr

Re: s970 can not booting
« Reply #2 on: January 30, 2021, 09:58:10 AM »
voici la procedure  here is the procedure

and after that it's usually gone for a spin  brand new

good luck

« Last Edit: January 30, 2021, 10:00:54 AM by tyros5psr »
good day de Tyros5psr

handicapped with means of the music no life

Offline Aquilauno

Re: s970 can not booting
« Reply #3 on: January 30, 2021, 02:19:43 PM »
Hi Hoxuthi
you could try to reinstall the latest firmware...

Last Year I had a problem with the sx900 that getting stuck on the logo, I could only turn it off.
 I installed its latest firmware and it resumed operation. Try it as a last resort ... and good luck.

Offline overover

Re: s970 can not booting
« Reply #4 on: January 30, 2021, 03:06:05 PM »
Hi hoxuthi,

I suggest to try first a normal System Reset (already mentioned by tyros5psr): Press and hold the right-most white key (C6) while powering on the S970.

  If this doesn't help try re-installing the latest firmware first (already mentioned by Aquilauno):

Please refer to the "Firmware Installation Guide" that you can download here:

If you are successful with this method, this has the advantage that your system settings and the content of the user drive are retained.

If this doesn't help either, i.e. the error still occurs, I recommend trying to perform a Factory Reset using the internal Test Program:

- Download the S770/S970 Service Manual and open the PDF on your computer:

- Read pages 38 & 39 of the Service Manual and try to start up the Test Mode. (There are two different methods to do this. So if the method 1 fails, try method 2.)
- If the Test Mode can be started successfully, execute Test item "081 : Factory Set", then execute Test item "083 : Test Exit".

- Then restart the S970 and wait unil the "Force Format" procedure is completely finished. If you're lucky, the S970 will start normally again.

Hope this helps!

Best regards,
« Last Edit: January 31, 2021, 01:43:20 AM by overover »
They always said: "This is not possible!"  Then someone came and - just did it!

Never put the manual too far away.  There's more in it than you think!
The following users thanked this post: tyros5psr, hoxuthi

Offline hoxuthi

Re: s970 can not booting
« Reply #5 on: January 31, 2021, 01:36:53 AM »
Thank you everyone, I will try everything and see if it works for me.
The following users thanked this post: tyros5psr