Author Topic: to Avoid reflections on the sx900 display ...? it can be done!  (Read 1426 times)

0 Members and 1 Guest are viewing this topic.

Offline Aquilauno

1) The Problem...
« Last Edit: January 24, 2021, 08:01:28 PM by Aquilauno »
 

Offline Aquilauno

Re: Avoid reflections on the sx900 display ...? it can be done!
« Reply #1 on: January 24, 2021, 07:56:10 PM »
2) the idea
 

Offline Aquilauno

Re: Avoid reflections on the sx900 display ...? it can be done!
« Reply #2 on: January 24, 2021, 07:56:36 PM »
3) The realization.
 

Offline Aquilauno

Re: Avoid reflections on the sx900 display ...? it can be done!
« Reply #3 on: January 24, 2021, 07:57:21 PM »
4) the test
 
The following users thanked this post: tyros5psr

Offline Aquilauno

Re: Avoid reflections on the sx900 display ...? it can be done!
« Reply #4 on: January 24, 2021, 07:57:51 PM »
5) a final touch of color.
 

Offline Aquilauno

Re: Avoid reflections on the sx900 display ...? it can be done!
« Reply #5 on: January 24, 2021, 07:59:22 PM »
conclusion... it works  :)
 
The 2 x 9.5 cm flap must be positioned under the lectern so that the structure is firmly fixed. Access to the touch screen remains optimal.

I made the prototype in cardboard, in the future I will try to make it in plywood to see if I can put two small hinges on the sides to close the screen to protect the display (in this case the 2 cm flap must be in thin plastic that allows the insertion under the music rest, a little black silicone where the structure rests will avoid the graffiti on the keyboard.
Pietro ;)
« Last Edit: January 24, 2021, 08:02:15 PM by Aquilauno »
 
The following users thanked this post: Woudi

Offline Lucille Chung

Re: to Avoid reflections on the sx900 display ...? it can be done!
« Reply #6 on: January 24, 2021, 08:49:55 PM »


I've also got a fix for this.   I use an 88-key board as a MIDI controller, and I tip the PSR up at an angle at the back, since I don't use the PSR keyboard now anyways.     That keeps the LCD more visible.   
PSR-SX900 and PSR-S910
 

Offline Jeff_M

Re: to Avoid reflections on the sx900 display ...? it can be done!
« Reply #7 on: January 24, 2021, 11:53:54 PM »
_________________________________________________ _______________________________________
6)  The feedback.
_________________________________________________ _______________________________________
I batted one out this afternoon and it works slick.  I may do one out of thin sheet metal if I can put something on the edges to prevent scarring.  Thanks for the idea, Aqualano!
« Last Edit: January 24, 2021, 11:56:41 PM by Jeff_M »
 

Offline overover

Re: to Avoid reflections on the sx900 display ...? it can be done!
« Reply #8 on: January 25, 2021, 12:10:57 AM »
The German company "Mister Music" has a so-called "glare protection" (intended for Genos) on offer. However, this plastic part is not cheap: ;)
>>> https://www.mistermusic-profishop.de/tasten/zubehoer/staender-halterungen/7169/mister-music-display-blendschutz-fuer-yamaha-genos


Best regards,
Chris
They always said: "This is not possible!"  Then someone came and - just did it!

Never put the manual too far away.  There's more in it than you think!
 

Offline Aquilauno

Re: to Avoid reflections on the sx900 display ...? it can be done!
« Reply #9 on: January 25, 2021, 12:13:53 PM »
________________________________________________________________________________________
6)  The feedback.
_________________________________________________ _______________________________________
I batted one out this afternoon and it works slick.  I may do one out of thin sheet metal if I can put something on the edges to prevent scarring.  Thanks for the idea, Aqualano!


rubber tube you cut it on one side and insert it (glue it on the edge ....)