Author Topic: to Avoid reflections on the sx900 display ...? it can be done!  (Read 2292 times)

0 Members and 1 Guest are viewing this topic.

Offline Aquilauno

1) The Problem...

[attachment deleted by admin]
« Last Edit: January 24, 2021, 08:01:28 PM by Aquilauno »
 

Offline Aquilauno

Re: Avoid reflections on the sx900 display ...? it can be done!
« Reply #1 on: January 24, 2021, 07:56:10 PM »
2) the idea

[attachment deleted by admin]
 

Offline Aquilauno

Re: Avoid reflections on the sx900 display ...? it can be done!
« Reply #2 on: January 24, 2021, 07:56:36 PM »
3) The realization.

[attachment deleted by admin]
 

Offline Aquilauno

Re: Avoid reflections on the sx900 display ...? it can be done!
« Reply #3 on: January 24, 2021, 07:57:21 PM »
4) the test

[attachment deleted by admin]
 

Offline Aquilauno

Re: Avoid reflections on the sx900 display ...? it can be done!
« Reply #4 on: January 24, 2021, 07:57:51 PM »
5) a final touch of color.

[attachment deleted by admin]
 

Offline Aquilauno

Re: Avoid reflections on the sx900 display ...? it can be done!
« Reply #5 on: January 24, 2021, 07:59:22 PM »
conclusion... it works  :)
 
The 2 x 9.5 cm flap must be positioned under the lectern so that the structure is firmly fixed. Access to the touch screen remains optimal.

I made the prototype in cardboard, in the future I will try to make it in plywood to see if I can put two small hinges on the sides to close the screen to protect the display (in this case the 2 cm flap must be in thin plastic that allows the insertion under the music rest, a little black silicone where the structure rests will avoid the graffiti on the keyboard.
Pietro ;)
« Last Edit: January 24, 2021, 08:02:15 PM by Aquilauno »
 
The following users thanked this post: Woudi

Lucille Chung

  • Guest
Re: to Avoid reflections on the sx900 display ...? it can be done!
« Reply #6 on: January 24, 2021, 08:49:55 PM »


I've also got a fix for this.   I use an 88-key board as a MIDI controller, and I tip the PSR up at an angle at the back, since I don't use the PSR keyboard now anyways.     That keeps the LCD more visible.   

Offline Jeff_M

Re: to Avoid reflections on the sx900 display ...? it can be done!
« Reply #7 on: January 24, 2021, 11:53:54 PM »
_________________________________________________ _______________________________________
6)  The feedback.
_________________________________________________ _______________________________________
I batted one out this afternoon and it works slick.  I may do one out of thin sheet metal if I can put something on the edges to prevent scarring.  Thanks for the idea, Aqualano!
« Last Edit: January 24, 2021, 11:56:41 PM by Jeff_M »
 

Offline overover

Re: to Avoid reflections on the sx900 display ...? it can be done!
« Reply #8 on: January 25, 2021, 12:10:57 AM »
The German company "Mister Music" has a so-called "glare protection" (intended for Genos) on offer. However, this plastic part is not cheap: ;)
>>> https://www.mistermusic-profishop.de/tasten/zubehoer/staender-halterungen/7169/mister-music-display-blendschutz-fuer-yamaha-genos


Best regards,
Chris
➪ Everyone kept saying "That won't work!" - Then someone came along who didn't know that and just did it.
➪ Never put the manual too far away: There's more in it than you think! ;-)
 

Offline Aquilauno

Re: to Avoid reflections on the sx900 display ...? it can be done!
« Reply #9 on: January 25, 2021, 12:13:53 PM »
________________________________________________________________________________________
6)  The feedback.
_________________________________________________ _______________________________________
I batted one out this afternoon and it works slick.  I may do one out of thin sheet metal if I can put something on the edges to prevent scarring.  Thanks for the idea, Aqualano!


rubber tube you cut it on one side and insert it (glue it on the edge ....)

[attachment deleted by admin]