Author Topic: sample Robot  (Read 2972 times)

0 Members and 1 Guest are viewing this topic.

Offline djp

sample Robot
« on: December 30, 2020, 03:15:48 PM »
Hi everyone, I have received sample robot for xmas how do i export the samples to my keyboard and in what format I have a yamaha Genos
Thank you
 

Offline Normanfernandez

Re: sample Robot
« Reply #1 on: December 30, 2020, 03:17:16 PM »
The Software SampleRobot??
 

Offline djp

Re: sample Robot
« Reply #2 on: December 30, 2020, 03:34:39 PM »
yes any help would be apreciated
 

Offline Normanfernandez

Re: sample Robot
« Reply #3 on: December 30, 2020, 04:06:51 PM »
I'm gonna assume that you know what Sample Robot does and what are its uses.

Once you have the samples ( Wave 44KHZ . 16 BIT Only )
You will need Yamaha Expansion Manager and create your Expansion pack using those samples.

Norman.
 

Offline alka

Re: sample Robot
« Reply #4 on: December 30, 2020, 05:27:51 PM »
From SampleRobot export to SF2, then in YEM import content SF2
 

Offline Normanfernandez

Re: sample Robot
« Reply #5 on: December 30, 2020, 05:46:44 PM »
Go with Alka's method. 

Sf2 will automatically do it on YEM.
 

Offline djp

Re: sample Robot
« Reply #6 on: December 30, 2020, 06:02:18 PM »
thanks very much for the information
 

Offline djp

Re: sample Robot
« Reply #7 on: January 04, 2021, 11:14:31 AM »
Has anyone got any examples of sample robot sounds as i, struggling to convert for my genos
 

Offline overover

Re: sample Robot
« Reply #8 on: January 04, 2021, 11:39:22 AM »
Has anyone got any examples of sample robot sounds as i, struggling to convert for my genos

Hi djp,

use "Import/Export" menu > "Export selected project as..." > "Soundfont2 (*.sf2) in SampleRobot.

In YEM use "My Packs" > "Import Pack" and select your .sf2 file to create a new Pack with the contents of the .sf2 file automatically.

You can also use an existing Pack or create a new, empty Pack manually in YEM, and then use "Import Content" to import the .sf2 file.

When you double-click a certain Voice in your new Pack, you can make additional settings for the "Common" parameters and/or also separately for each "Element". To save the changes click the red arrow "Back" and then the "Save" button. (If you don't want to save, click "Discard" here.)

Hope this helps!


Best regards,
Chris
Everyone always said: "This is not possible!" - Then someone came and ... just did it!
 

Offline ugawoga

Re: sample Robot
« Reply #9 on: May 19, 2021, 09:54:13 PM »
Hi
If you have a computer and a daw like Cubase, you obvously would have a few VST instruments.
Vst 's like Korg, Arturia Sampletank etc will open up a minefield of sounds to sample quickly and easy
At the moment you can only sample VST 2, and the Samplerobot makers say vst 3 will be possible on a later update.
Once you have a sample and converted to SF2 ,just tweak away in YEM until you have what you desire.
Read the manual and look at the video's and it will only take a couple of weeks to master it.

All the Best
John :)
Genos, I7 computer 32 gig ram, Focusrite 6i6, Cubase controller, Focal Alpha Monitors, Yamaha DXR8 Speakers
Cubase 10, Sonarworks, Izotope.  Sampletank, Arturia and Korg software.  Now IK Mixbox