Author Topic: Change of ACMP voice  (Read 2471 times)

0 Members and 1 Guest are viewing this topic.

Offline torben

Change of ACMP voice
« on: November 28, 2020, 03:43:44 PM »
Hi friends

I am getting old I have forgotten how to change the voice on the ACMP tab!

kind regards

Torben
Tyros 5 was my choice - now it is only Genos1 !
 

Offline Fred Smith

Re: Change of ACMP voice
« Reply #1 on: November 28, 2020, 06:04:25 PM »

I am getting old I have forgotten how to change the voice on the ACMP tab!


Do you mean the left voice, or the drum voice(s)?

Cheers,
Fred
Fred Smith,
Saskatoon, SK
Sun Lakes, AZ
Genos, Bose L1 compacts, Finale 2015
Check out my Registration Lessons
 

Offline overover

Re: Change of ACMP voice
« Reply #2 on: November 28, 2020, 06:55:30 PM »
Hi Torben,

if you are in the Mixer (e.g. in the Style tab), simply touch the Voice icon of the desired Part to open the Voice Selection display. Now you can select a different Voice for that Part. (See also the attached picture.)

If you change Voices of Style Parts, you can just memorize this to a Registration, or call up Style Creator and re-save the Style there.


Best regards,
Chris

[attachment deleted by admin]
« Last Edit: November 28, 2020, 07:18:58 PM by overover »
➪ Everyone kept saying "That won't work!" - Then someone came along who didn't know that and just did it.
➪ Never put the manual too far away: There's more in it than you think! ;-)
 

Offline torben

Re: Change of ACMP voice
« Reply #3 on: November 28, 2020, 09:17:57 PM »
Hi Fred - I mean the left voice, not the drums ....

Kind regard

Torben
Tyros 5 was my choice - now it is only Genos1 !
 

Offline Fred Smith

Re: Change of ACMP voice
« Reply #4 on: November 28, 2020, 10:29:41 PM »
Hi Fred - I mean the left voice, not the drums ....

Kind regard

Torben

Well, one way is to turn the left voice on.

Or, is it that you’re trying to change the left voice in the OTS? If so, use the memory button.

Cheers,
Fred
Fred Smith,
Saskatoon, SK
Sun Lakes, AZ
Genos, Bose L1 compacts, Finale 2015
Check out my Registration Lessons
 

Offline overover

Re: Change of ACMP voice
« Reply #5 on: November 28, 2020, 11:05:16 PM »
Hi Fred - I mean the left voice, not the drums ....

Hi Torben,

changing the Left Voice can be done in several ways:
1) Touch the Left Voice icon in the Home display.
2) Press Voice Select button for the Left Voice (next to the Part Select On/Off button).
3) Press "Voice" Gateway button to open the Voice Part Setup display and touch the Left Voice icon.
4) Open Mixer display, go to tab "Panel" and touch the Left Voice icon.

BUT: Would you like to change the sounds (Bass & String Pad) that sound when you play a chord in the Style Control section while the Style is stopped (and the ACMP button is On)?

This function is called "Stop ACMP" (stopped accompaniment). These sounds for the left hand cannot be changed directly.

Under "Menu > Style Setting > Stop ACMP" you will find the three possible settings "Off", "Style" and "Fixed".
- When set to "Fixed", the bass & string pad sounds will sound for ALL Styles.
- When set to "Style", Stop ACMP uses the Voices of the Bass and Pad Parts of the currently loaded Style.
To change the Stop ACMP sounds, you have to change the Bass and/or Pad Voices of the Style used (and, as mentioned, Stop ACMP must be set to the option "Style".


Hope this helps!

Best regards,
Chris
« Last Edit: November 28, 2020, 11:11:45 PM by overover »
➪ Everyone kept saying "That won't work!" - Then someone came along who didn't know that and just did it.
➪ Never put the manual too far away: There's more in it than you think! ;-)
 

Offline torben

Re: Change of ACMP voice
« Reply #6 on: November 29, 2020, 12:41:30 AM »
Hi guys

Thanks! Chris had the solution. It was the “Stop acmp” that I was looking for!

cheers

Torben
Tyros 5 was my choice - now it is only Genos1 !
 

Offline overover

Re: Change of ACMP voice
« Reply #7 on: November 29, 2020, 01:06:37 AM »
Thanks for your feedback, Torben!

I'm glad to could help you!


Best regards,
Chris
➪ Everyone kept saying "That won't work!" - Then someone came along who didn't know that and just did it.
➪ Never put the manual too far away: There's more in it than you think! ;-)