Hello all, I have saved my registrations settings in 1 to 8 but I cant find out how to save the bank of settings so that I can start again with some more settings. I have looked in the manual but cannot seem to find any instructions how to do it Any advise would be great thanks.
Hi shezza,
please read again the pages 86 - 89 in the SX900 Owner's Manual ("Storing and Calling up Custom Panel Setups—Registration Memory ..."
Information for "Saving the Registration Memory as a Bank file" you can find on page 88.
P.S.
To make another Registration Bank, you can just memorize your
new settings to the buttons 1 - 8 (
over the settings of a previous Bank). Then press SAVE and
enter a new filenamefor the new Bank. If you do this, the previous bank will remain unchanged. (If you don't enter a new filename, your new settings will overwrite the previous Bank.)
To
delete certain Registrations (so that the relevant button is no longer lit), use the "Regist Bank Edit" function (page 89 in the Owner's Manual). If needed, you can also make a completly empty Bank: Just delete the Registrations of ALL the buttons, and then save this state as a new Bank (using a filename like "empty Bank"). But, as mentioned, this is usually NOT needed. It would make more sense if you make your preferred settings first (e.g. Split Points, Pedals, Assignable settings, etc.), memorize this state to Reg button #1, and save this as a new Bank. Then you can use these settings as a defined starting point in the future.
Best regards,
Chris