Author Topic: Sync Start on one touch setting  (Read 234 times)

0 Members and 1 Guest are viewing this topic.

Offline Linson

Sync Start on one touch setting
« on: October 27, 2020, 12:52:42 AM »
Hi All, when a style is stopped and one touch button is pressed, synch start button turns on ( freeze off ).Is there a way change this behavior on the global setting?
Thank you
 
The following users thanked this post: overover

Offline overover

Re: Sync Start on one touch setting
« Reply #1 on: October 27, 2020, 01:16:33 AM »
Hi Linson,

no, pressing an OTS button while the Style is stopped always activates the Sync Start. This cannot be changed.

I recommend you to use Registrations instead of OTS. When using Registrations you can do "almost everything". :)
(You can memorize OTS settings to Registrations of course, if desired.)

Just a tip: Have a look to the section "Parameter Chart" in the DATA LIST of your keyboard. There you will see e.g. how many different parameters can be memorized to Registrations, and how few parameters can be memorized to OTS.

Hope this helps!


Best regards,
Chris



(The OTS LINK function must be switched OFF then.)
« Last Edit: October 27, 2020, 01:23:53 AM by overover »
Everyone always said: This is not possible! - Then someone came and ... just did it!
 

Offline Linson

Re: Sync Start on one touch setting
« Reply #2 on: October 31, 2020, 03:46:04 AM »
Thank you Chris.
 

Offline overover

Re: Sync Start on one touch setting
« Reply #3 on: October 31, 2020, 03:57:30 AM »
Thank you Chris.

Thanks for your feedback, Linson!


Best regards,
Chris
Everyone always said: This is not possible! - Then someone came and ... just did it!