Author Topic: Intro button  (Read 3783 times)

0 Members and 1 Guest are viewing this topic.

Offline ibrox2

Intro button
« on: July 31, 2020, 07:38:00 AM »

I was wondering if anyone has an idea where
To get tyros two intro buttons I canít seem to
Get any joy.    Thanks.   Jim

Offline overover

Re: Intro button
« Reply #1 on: July 31, 2020, 10:42:02 AM »
Hi Jim,

the German company "Audio-Service Schierbecker" in Hamburg sells Yamaha spare parts. Unfortunately I don't know if they also deliver to Scotland.

Click on this link:

Type in "tyros2" in the field "Gerštetyp" and click on the magnifying glass. Then click on the number "14502" or on the little picture of the Tyros2. In the right column you will find the Tyros2 spare parts.

You can contact them via email by clicking this link:

Their internal item number for the Tyros2 is 14502. (Write this number in the subject of the email.)

The Yamaha Part No. you need is:
WF307000    Button Assembly "I, II, III" (INTRO or ENDING)

(The indicated price is around 22 euros.)

By the way: You can download the Tyros2 SERVICE MANUAL here:

Hope this helps!

Best regards,
« Last Edit: July 31, 2020, 10:50:03 AM by overover »
➪ Everyone kept saying "That won't work!" - Then someone came along who didn't know that and just did it.
➪ Never put the manual too far away: There's more in it than you think! ;-)

Offline EileenL

Re: Intro button
« Reply #2 on: July 31, 2020, 12:13:42 PM »
If you are in the UK give Yamaha technical support a ring. They will help you.

Offline ibrox2

Re: Intro button
« Reply #3 on: July 31, 2020, 02:49:57 PM »

Thank you Chris and Eileen I will
Look into what you have said itís
Appreciated.      Jim

Offline tyrosaurus

Re: Intro button
« Reply #4 on: July 31, 2020, 04:13:56 PM »
Hi Jim,

Yamaha UK will confirm the part number for you, but will not sell parts to mere 'plebs' (i.e. customers) like us!  Instead they will suggest a reseller, which is usually one of the Yamaha Authorised Service Centres. The last time I needed parts they suggested I used Sontec in Norwich, which I did, but it took weeks for them to arrive and even then one of the parts supplied was not correct!

The reseller will usually have to order the parts from Yamaha (where else  ;)) which adds to the time, and they will most likely add their own markup to the price.

Its possible that any dealer that has an account with Yamaha can order parts from them, so it might be worth checking out local ones to see if they will get them for you (Kenny's Music in Glasgow for example), although this may not be any better than Yamaha's suggestions.

Finally, to replace the button tops you will need to remove the PNL circuit board which is not difficult, but it has a lot of screws.  The service manual contains disassembly instructions so is well worth downloading.


« Last Edit: July 31, 2020, 04:18:01 PM by tyrosaurus »

Offline ibrox2

Re: Intro button
« Reply #5 on: July 31, 2020, 06:36:26 PM »
Hi Ian

Thanks very much for your help itís appreciated.   Jim