Topic: using headphones

[smeden12]

Sometimes when I play my T5, I don`t want to desturb, so I use to plug in my headphones, then only I can hear what i`m playing'  UNTIL NOW!!
SOMETHING HAS HAPPEND! When I now plug in my headphones, I can hear music from myT5 and allso in my headphones !!???
WHATS WRONG?

[Toril S]

Are you sure the plug is all the way in?

[BenoitM]

As Toril wrote, perhaps that the headphone jack that was not fully inserted.

It could also be an unwanted configuration change.

according to the Tyros 5 Reference Manual (page 128) :

On the 'Config 2' page of the 'Utility' screen, there's a 'Line Out' element:

Determines whether or not the sound is output via LINE OUT (MAIN). HEADPHONE SW: LINE OUT (MAIN) sounds normally, but is cut off when headphones are inserted to the PHONES jack. ON: Sound is output via LINE OUT (MAIN), even if headphones are connected. OFF: LINE OUT (MAIN) sound is off

Benoit

[Fred Smith]

Are you sure the plug is all the way in?

There’s a setting, in Utility, which allows you to have the speakers on or off when the headphones are plugged in.

You just have to reset it.

Cheers,
Fred

[norrimac]

Check you haven't plugged the T5 output jacks into the Aux out. If you have you can still hear the speakers.

[hammer]

Fred is right.  I no longer have a T5 and don't remember how to get to the setting but there is a setting for that will keep the speakers playing even with the headphones or speakers plugged in.
Look at the manual and there should be a reference for this.
Deane

[EileenL]

Fred is correct in what he says so make sure you have the speakers in the off position when using head phones for practice

[smeden12]

Thank you all for helping me. The  headphonetruble is now over. I had to fix it via "UTILLITIES.  . and I hope you all are well in this corona time!!!!

[Toril S]

So happy! I love solutions😀😀