Author Topic: My equalization settings SX900  (Read 2923 times)

0 Members and 1 Guest are viewing this topic.

Offline Enildo

My equalization settings SX900
« on: March 21, 2020, 09:55:30 PM »
My equalization settings, for those who want to experiment.

[attachment deleted by admin]
« Last Edit: March 21, 2020, 09:58:29 PM by Enildo »
When word fail, Music speaks!
 
The following users thanked this post: Dave Shively, LaHawk, JohnStarbuck, hans1966, Aquilauno, mhack

Offline hans1966

Re: My equalization settings SX900
« Reply #1 on: March 22, 2020, 01:28:09 AM »
Hi Enildo, thanks for sharing your EQ settings. I wanted to ask you how can I take a screenshot on the SX900. in advance thanks for the reply. regards. Hans
"Enjoying my SX600, and moving step by step through the journey of life"
 

Offline ton37

Re: My equalization settings SX900
« Reply #2 on: March 22, 2020, 02:11:42 AM »
My best regards,
Ton
 
The following users thanked this post: stephenm52, hans1966

Offline Enildo

Re: My equalization settings SX900
« Reply #3 on: March 22, 2020, 11:15:46 AM »
Hi Enildo, thanks for sharing your EQ settings. I wanted to ask you how can I take a screenshot on the SX900. in advance thanks for the reply. regards. Hans

Hi Hans,

I was going to answer, but Ton answered above.

Enildo
When word fail, Music speaks!
 

Offline hans1966

Re: My equalization settings SX900
« Reply #4 on: March 22, 2020, 06:01:31 PM »
Thanks Ton for the information, :)  and To Enildo for the intention. ;)  regards. Hans
"Enjoying my SX600, and moving step by step through the journey of life"
 

Offline rene

Re: My equalization settings SX900
« Reply #5 on: April 02, 2020, 11:16:33 AM »
thanks for your settings

blackpool

  • Guest
Re: My equalization settings SX900
« Reply #6 on: April 02, 2020, 11:56:44 AM »
Thanks En. I will have a play around with that later.

So many combinations and permutations .... I suppose every body uses different settings. I usually tweak the factory ones. I find like reverb it can change so much in a different place. I find it's also handy to have reverb on a live control to help with the end sound.

Keith

Offline LaHawk

Re: My equalization settings SX900
« Reply #7 on: April 02, 2020, 05:38:57 PM »
Thanks  Enildo

My setup is very similar, only I increased the Compressor output to 78 for a more louder overall sound

Any changes you make and like should be saved and named for easy recall
Larry   PSR-SX900
 My You Tube Recordings