« previous next »
Pages: [1]   Go Down

Author Topic: Connector to Use Outboard Monitor Setup for SX900  (Read 1705 times)

0 Members and 1 Guest are viewing this topic.

joemystery

  • Guest
Connector to Use Outboard Monitor Setup for SX900
« on: January 10, 2022, 07:22:26 PM »
Hi folks. Looking for a compatible USB display adapter for my new SX900. I have seen the Yamaha compatible adapter list (2019) but it includes the caveat

"Please note that these devices might be updated and new versions released which may stop them from working
correctly with this product. For more information on these devices including availability, please consult the device manufacturer."

Anyone recently by an adapter that functions. Also by USB adapter are they referring  to a display port adapter. Thanks. JM :)
« Last Edit: January 10, 2022, 07:34:14 PM by joemystery »
Logged
 

Offline overover

Re: Connector to Use Outboard Monitor Setup for SX900
« Reply #1 on: January 10, 2022, 08:07:27 PM »
Hi JM,

Only USB 2.0 display adapters are suitable. The adapter must be based on a specific chipset (DisplayLink DL-165 or DL-195). USB 3 adapters do NOT work on Yamaha keyboards. See also here:
>>> https://www.psrtutorial.com/forum/index.php/topic,56435.msg439523.html#msg439523

To be on the safe side, I recommend to buy from a well-known music store. I am using the "iTec USB2HDTRIO" adapter with no problems:
>>> https://www.thomann.de/gb/i_tec_usb2hdtrio.htm


Best regards,
Chris
« Last Edit: January 10, 2022, 11:50:27 PM by overover »
Logged
➪ Everyone kept saying "That won't work!" - Then someone came along who didn't know that and just did it.
➪ Never put the manual too far away: There's more in it than you think! ;-)
 

joemystery

  • Guest
Re: Connector to Use Outboard Monitor Setup for SX900
« Reply #2 on: January 10, 2022, 11:25:23 PM »
Chris, appreciate the feedback. i will check out what you have recommended. Thanks again. JM
Logged
 

Offline beginpsrsx900

Re: Connector to Use Outboard Monitor Setup for SX900
« Reply #3 on: January 11, 2022, 05:47:30 PM »
Logged
PSR SX900, PA1000, 2x FCB 1010, BCF2000, NANO PAD, NANO KONTROL, Micro, ETC, ETC
 

Offline yogi62

Re: Connector to Use Outboard Monitor Setup for SX900
« Reply #4 on: February 05, 2022, 12:26:41 PM »
This is the one I bought here in the UK from Amazon - works fine.

WAVLINK Micro USB 2.0 to DVI/VGA/HDMI Video Graphics Display Adapter up to 1920 x 1080 for Multiple Extra Monitors Supports Windows and Mac.
Logged
 
Pages: [1]   Go Up
« previous next »