Author Topic: Pitch Bend error  (Read 5968 times)

0 Members and 1 Guest are viewing this topic.

ArunaBandara

  • Guest
Pitch Bend error
« on: December 16, 2019, 06:34:06 PM »
My s910 pb not correctly working.when I play a chord from auto accompany  it is not match Right part chord
It is semi tone error.
I clean pb also
Factory reseted but yet same problem.

However I zero pb range from mix console then work correctly

But if give 2semi tone pb range again same problem.

How I fix diz pleeeesssssszzz.
 

Offline panos

Re: Pitch Bend error
« Reply #1 on: December 16, 2019, 08:56:43 PM »
Hi ArunaBandara,
I have got an s750.
From default I can see that the Pitch Bend in all voices gives +2 semitones.
I couldn't find a way to change this to +1 semitone by default on my model.
So to keep the +1 semitone(and not 2 semitones),
I press Direct Access and press the Pitch Bend to call the Mixing Console to change the pitch bend semitone and save it either at the OTS voices(as a new user style) or on a Registration.

Maybe there is a system function on your s910 for the pitch bend range for all voices?
Have you checked there?
« Last Edit: December 16, 2019, 09:01:40 PM by panos »
 

Offline charlote

Re: Pitch Bend error
« Reply #2 on: January 25, 2023, 01:11:34 AM »
Hello friend, I saw your comment, the same thing is happening to me as your prs, how did you solve it? Thanks
 

Offline travlin-easy

Re: Pitch Bend error
« Reply #3 on: January 25, 2023, 06:01:17 PM »
A master system reset should solve your problem.

Good luck,

Gary 8)
Love Those Yammies...
 

Offline charlote

Re: Pitch Bend error
« Reply #4 on: January 26, 2023, 12:16:04 AM »
Hi Mr. Gary, I have tried all 2 possible resets.
The 1 pressing the last key.
The 2 restarting it from system.
But it seems that a third reboot, called internal test, but I don't know how to do it, maybe you know how to do it in advance, thank you very much.
 

Offline travlin-easy

Re: Pitch Bend error
« Reply #5 on: January 26, 2023, 05:36:20 PM »
The test is relatively easy to conduct.

1. Turn off the keyboard.

2 Press C2#, F2, G2# (all three together) and while keeping them depressed,

3 switch the power on - you will see "TEST" on the display.

With the tempo -/+ button you can then toggle through the various tests to be performed. The Start/Stop button will start the test. Be sure to wait till all the tests have been completed.

Hope this helps,

Gary 8)
Love Those Yammies...
 

Offline charlote

Re: Pitch Bend error
« Reply #6 on: January 26, 2023, 09:30:34 PM »
Hello Mr. Gary, could the test solve my problem?
I'll try it tomorrow. Thank you very much.
 

Offline charlote

Re: Pitch Bend error
« Reply #7 on: January 26, 2023, 09:36:15 PM »
Or is it to locate the fault?
 

Offline travlin-easy

Re: Pitch Bend error
« Reply #8 on: January 27, 2023, 09:15:20 PM »
It will not solve the problem - it will only tell you if you have a problem and where it is located.

Good luck,

Gary 8)
Love Those Yammies...
 

Offline charlote

Re: Pitch Bend error
« Reply #9 on: January 28, 2023, 02:44:10 PM »
Hello Mr. Gary, your contribution is very valuable, it helped me to solve my problem, thank you very much.
 

Offline travlin-easy

Re: Pitch Bend error
« Reply #10 on: January 28, 2023, 06:51:10 PM »
Glad I was able to help.

Good luck,

Gary 8)
Love Those Yammies...
 

Offline charlote

Re: Pitch Bend error
« Reply #11 on: August 22, 2023, 01:21:01 AM »
Hello friends, the exact same problem happened to me, I tried to restart everything, etc.
The problem was the potentiometer of the pitch, I disconnected it and put an application that I downloaded from the playstore, which I control the pitch with my cell phone and it works perfectly, I hope it helps, thanks.