Topic: Pitch Bend error

[ArunaBandara]

My s910 pb not correctly working.when I play a chord from auto accompany  it is not match Right part chord
It is semi tone error.
I clean pb also
Factory reseted but yet same problem.

However I zero pb range from mix console then work correctly

But if give 2semi tone pb range again same problem.

How I fix diz pleeeesssssszzz.

[panos]

Hi ArunaBandara,
I have got an s750.
From default I can see that the Pitch Bend in all voices gives +2 semitones.
I couldn't find a way to change this to +1 semitone by default on my model.
So to keep the +1 semitone(and not 2 semitones),
I press Direct Access and press the Pitch Bend to call the Mixing Console to change the pitch bend semitone and save it either at the OTS voices(as a new user style) or on a Registration.

Maybe there is a system function on your s910 for the pitch bend range for all voices?
Have you checked there?

[charlote]

Hello friend, I saw your comment, the same thing is happening to me as your prs, how did you solve it? Thanks

[travlin-easy]

A master system reset should solve your problem.

Good luck,

Gary

[charlote]

Hi Mr. Gary, I have tried all 2 possible resets.
The 1 pressing the last key.
The 2 restarting it from system.
But it seems that a third reboot, called internal test, but I don't know how to do it, maybe you know how to do it in advance, thank you very much.

[travlin-easy]

The test is relatively easy to conduct.

1. Turn off the keyboard.

2 Press C2#, F2, G2# (all three together) and while keeping them depressed,

3 switch the power on - you will see "TEST" on the display.

With the tempo -/+ button you can then toggle through the various tests to be performed. The Start/Stop button will start the test. Be sure to wait till all the tests have been completed.

Hope this helps,

Gary

[charlote]

Hello Mr. Gary, could the test solve my problem?
I'll try it tomorrow. Thank you very much.

[charlote]

Or is it to locate the fault?

[travlin-easy]

It will not solve the problem - it will only tell you if you have a problem and where it is located.

Good luck,

Gary

[charlote]

Hello Mr. Gary, your contribution is very valuable, it helped me to solve my problem, thank you very much.

[travlin-easy]

Glad I was able to help.

Good luck,

Gary