Sysex Chart ( Table)
For making changes.
Auto type make it ( Chat)
Hi Norman,
now I understand.
You can find the Master EQ (MEQ) SysEx messages in the Genos DATA LIST book, page 102, "MIDI Parameter Change table (
MULTI EQ)".
The SysEx for the MEQ preset "
Flat" is:
F0 43 10 4C 02 40 00 00 F7 MultiEQ Type= Flat
The other presets are realized by sending the SysEx for MEQ
Flat first, followed by the parameters that are
different to the Flat setting.
In case of the Genos MEQ preset "
Bright", these SysEx are used:
F0 43 10 4C 02 40 00 00 F7 MultiEQ Type= Flat
F0 43 10 4C 02 40 02 0E F7 MultiEQ EQ Freq 1 = 14
F0 43 10 4C 02 40 05 3F F7 MultiEQ EQ Gain 2 = 63
F0 43 10 4C 02 40 09 42 F7 MultiEQ EQ Gain 3 = 66
F0 43 10 4C 02 40 0A 26 F7 MultiEQ EQ Freq 3 = 38
F0 43 10 4C 02 40 0B 11 F7 MultiEQ EQ Q3 = 17
F0 43 10 4C 02 40 0D 41 F7 MultiEQ EQ Gain 4 = 65
F0 43 10 4C 02 40 11 43 F7 MultiEQ EQ Gain 5 = 67
F0 43 10 4C 02 40 12 33 F7 MultiEQ EQ Freq 5 = 51
F0 43 10 4C 02 40 20 3F F7 MultiEQ
F0 43 10 4C 02 40 24 3E F7 MultiEQ
F0 43 10 4C 02 40 25 20 F7 MultiEQ
F0 43 10 4C 02 40 29 22 F7 MultiEQ
Hope this helps!
Best regards,
Chris