Author Topic: Assign live conrol  (Read 9404 times)

0 Members and 1 Guest are viewing this topic.

Offline Ingar

Assign live conrol
« on: October 27, 2019, 08:08:14 PM »
How can I save the settings on live control assign knobs? I manage to change them, but they easily jumps back to factory settings. Would appreciate a solution.
Sincerely, Ingar
 

Offline ton37

Re: Assign live conrol
« Reply #1 on: October 27, 2019, 09:16:51 PM »
Hi Ingar, you can/have to save it in a Reg.Memory. The keyboard remembers the last setting of the Live Control when Shut Off/On. If you have a favourite setting than you could make e.g. the Reg.Mem.8 as a 'Master RM' . If you whish you can save other favourite settings too. Once you start up your KB, you load Mem.Bank, e.g. named as 'MasterSetting',  then press RM8 and your KB is 'ready to go'... ;)
« Last Edit: October 27, 2019, 09:18:01 PM by ton37 »
My best regards,
Ton
---------------------------
Former KB:Technics Sx-Kn7000, Tyros 5/76, Genos, S770, S975.
 

Offline Ingar

Re: Assign live conrol
« Reply #2 on: October 27, 2019, 09:29:51 PM »
What would I do without you  ;D

Yes I do that!